Extra dry
A higher temperature in the final rinse improves the drying
results if you activate this option. Energy consumption is
slightly increased.
If the dishwasher is switched off using the
main power switch or during a power cut
If the dishwashing programme was not finished, the
interrupted programme continues when power is restored.
Half load
This option adapts the dishwashing programme to a
half-filled dishwasher, using less energy and water.
Delayed start
When you select Delayed start the dishwasher will start
1-24 hours after you close the door.
1 Press the button once to activate Delayed start. Press
the button several times – or hold it in – to set the
desired number of hours.
2 Close the door and the dishwasher counts down 1 hour
at a time and starts after the selected delay.
If you want to cancel the Delayed start option, open the door
and press and hold the main power switch until the display
turns off.
Start the dishwasher
Close the door to start the dishwasher. If the main power
switch is on the dishwasher will start automatically when
the door is closed.
TIME - Time remaining
Once you have chosen a programme and options, the time
the programme took when last used is displayed.
Stopping or changing a programme
If you want to change programme after starting the
dishwasher, open the door then press and hold the main
power switch until the display turns off. Add more detergent
if the lid of the detergent dispenser has opened. Then press
the main power switch, choose a new programme and close
the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically. Add
the dishes and close the door. After a while, the dishwasher
continues the programme.
How to get the best drying results
• Fully load the dishwasher.
• Place the dishes in the machine so that the rinse water
will run off them; this is especially important for plastic.
• Top up with rinse aid or increase the rinse aid dosage
level.
• Activate the Extra dry option.
• Open the door a little once the programme has finished.
• Allow the dishes to cool before unloading the
dishwasher.
Once the programme has finished
The dishwasher switches off automatically after the
programme ends. Shut off the water tap after each use.
