Bedienungsanleitung Gorenje GW65 CLI (Seite 11 von 13) (Englisch)

603566

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

CLEANING AND MAINTENANCE

Do not use a steam cleaning appliance to clean this

appliance. The steam

could reach the electrical components and cause a short circuit.

•

The appliance should be cleaned regularly, preferably after each use, after cooling

down.

•

To avoid water marks and limescale deposits, use a soft cloth to dry surfaces that

have been cleaned with water.

•

Food that has boiled over can cause discolouration of the burner parts and the

stainless steel cooktop. Remove any soiling immediately.

To avoid damaging the outer surfaces of your appliance, do not use:

•

cleaning agents containing soda, alkalines, ammonia, acids or chlorides

•

cleaning agents containing descaling agents

•

stain or rust removers

•

abrasive cleaning agents, e.g. powder cleaners and cream cleaners

•

solvent-based cleaning agents

•

dishwasher cleaner

•

grill and oven cleaners

•

glass cleaning agents

•

hard, abrasive brushes or sponges, e.g. pot scourers, brushes or sponges which

have been previously used with abrasive cleaning agents

•

sharp pointed objects (these can damage the seal between the frame and the

worktop).

Stainless steel surfaces

Clean stainless steel surfaces using a microfibre cloth or with a solution of warm

water and a little washing-up liquid applied with a soft sponge. In the case of

stubborn dried-on soiling, soak first.

Finally, dry with a soft cloth.

The stainless steel cooktop cleaner can be used to clean the frame when required.

Apply with an even pressure following the direction of the "grain".

The care product for stainless steel can be used after cleaning to help keep your

appliance looking good and to hinder resoiling.

Apply sparingly with a soft cloth following the instructions on the packaging.

Printed surfaces

The printing can be damaged if soiling (e.g. food or fluids that contained salt, olive

oil) is not removed immediately.

Remove any soiling immediately.

Do not use any stainless steel cleaner on printed surfaces.

This would rub off the print.

Pan support and control

knob

Do not clean the pan support in a dishwasher.

Remove the pan support. Clean the pan support and the control knob with a solution

of warm water and a little washing-up liquid applied with a soft sponge. Stubborn

soiling should be soaked first.

After cleaning, dry all surfaces with a clean cloth.

Burners

Do not clean any parts of the burner in a dishwasher.

The burner should be dismantled and then cleaned by hand using a solution of warm

water and a little washing-up liquid applied with a soft sponge.

Parts of the burner that cannot be removed should be wiped clean with a damp cloth

only.

The ignition candle and the candle flame failure device should be very carefully

wiped clean using a well wrung out cloth.

Do not let the ignitor get wet. If it gets wet, it will not spark.

After cleaning, dry all surfaces with a clean cloth.

Make sure that the flame slits are clean and completely dry.

The surface of the burner crown cover will become more matt with time. This is quite

normal and will not affect the operation of the cooktop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje GW65 CLI Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gorenje GW65 CLI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info