Bedienungsanleitung Gorenje k 286 clb (Seite 2 von 8) (Englisch)

357944

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Instructions for Use

environmental protecting precautions. (See We Care for the

Environment).

• Heating element incorporated in the appliance, all around

the rim, is controlled by the operation of the compressor and

it prevents the door gasket to freeze on to the freezer

housing.

• If the supply cord is damaged, it must be replaced by the

manufacturer or his service agent or a qualified person in

order to avoid hazard.

• The rating plate is inside the appliance or outside on the rear

wall.

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over

to the applicable collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused by

inappropriate waste handling of thisproduct. For more

detailed information about recycling of this product,

please contact your local city office, your household

waste disposal service or the shop where you

purchased the product.

Storing Time During Power Supply Interruption

Do not open the freezer in case of failure or power supply

interruption! In case the interruption is extended over longer

period of time (16 hours), take food out of the freezer and use

it, or make sure that is sufficiently cooled (perhaps you have an

extra appliance).

Disposing of the Worn Out Appliance

• When your appliance finally wears out, dispose it of. If the

appliance has a lock, break it, in order to prevent eventual

accidents (danger of children get locked inside the

appliance).

• The refrigerating system of the appliance is filled with

refrigerant and insulating substances which should be

separately treated and processed. Call your nearest

authorised service agent or specialised servicing centre. If

you don't find one, contact your local authorities or your

distributor. Be careful not to damage the tubes on the rear

wall of the appliance (danger of pollution).

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regulariy ventilated room.

Allowed ambient temperature depends on the model (class) of

the appliance and is stated on the rating plate of the appliance.

If you have amodel with integrated switch for intensive cooling,

consider the instructions in chapter "Temperature selection".

Never place the appliance near heat emitting devices (e.g.

cooker, radiator, water heater or similar devices) and do not

expose it to direct sunlight.

The appliance should be positioned at least 3 cm away from

the electric or gas cooker and at least 30 cm away from the oil

or coal stove. If this is not possible, use an appropriate

insulation.

Behind the appliance there should be free space at least 200

cm²

wide and above the appliance the high kitchen units

should be at least 5 cm away from the appliance in order to

assure adequate ventilation of the condenser unit.

Class Ambient temparature

SN (subnormal) from + 10°C to + 32°C

N (normal) from + 16°C to + 32°C

ST (sub-tropical) from + 16°C to + 38°C

T (tropical) from + 16°C to + 43°C

Placing the Appliance

• Place the appliance firmly on a solid base. Some appliances

have adjustable feet on the front side; use them to level the

appliance.

• Two spacers attached to the appliance must be fitted onto

the upper edge of the condenser, thus preventing the

appliance from being installed too close to the wall. Spacers

are manufactured for all-purpose function depending on the

distance of the condenser from the wall. Therefore turn

spacers correspondingly and fix them to the appliance.

• The appliance may stand freely or it can be placed next to a

kitchen furniture element or a wall. Mind the space required

to open the door and pull out the drawers and shelves (see

installation diagram).

35 mm

Connection to Power Supply

Connect the appliance with the cable and plug to the power

supply socket outlet with a ground terminal (safety socket).

Required nominal voltage and frequency are indicated on the

rating plate. The connection to the mains supply and earthing

have to be made according to current standards and

regulations. The appliance resists temporary voltage tolerance

up to -6 to +6 %.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje k 286 clb Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info