Bedienungsanleitung Gorenje k 7709 e inox (Seite 3 von 40) (Englisch)

326239

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

present one. The symbol S1 is off and the symbol S3 flashes. In

this moment the oven is switched off.

After turning the button 1 into the position "manual" the symbol S3

turns off and the symbol S1 reappears. The clock is set to

conventional (manual) mode.

If you wish to terminate roasting the oven must be switched

off!

Semi-automatic operation with the end of operation

Turn button 1 to the position "end". The display indicates the

current time. Set the desired end of operation time by turning

button 2 towards the position "+" or "-" (naturally, the end

time must be greater than the current time). The symbol S3

appears. The display returns to read current time 7 seconds

after the setting process is completed.

Once the current time reaches the preset end of operation

time, this is signaled by the sound alarm, which is switched

off automatically after 7 minutes, if it was not switched off

before by turning button 1 to any direction. The symbol S1 is

off and symbol S3 flashes. In this moment the oven is

switched off.

After turning button 1 into the position "manual" the symbol

S3 turns off and the symbol S1 reappears. The clock is set to

conventional (manual) mode.

If you wish to terminate roasting the oven must be

switched off!

Automatic operation with the preset period and the

end of operation

Turn button 1 to the position "period of operation" and by

turning button 2 towards "+" or "-" set the period of cooking.

Then turn button 1 into the position "end" and the display

indicates the nearest possible end of operation time. Set the

desired end of operation time by turning button 1 towards "+"

or "-". The symbol S1 is off if the end time is greater than the

current time + the preset period of operation.

The oven starts operating automatically according to the

preset times.

Example

Current time = 12:00, operation interval was set at 1:30 and

the end of operation at 14:00. This means that the oven will

start operating at 12:30.

Errors in setting the time

If the selected end time falls shorter than the current time +

period of operation, this is signaled by the sound alarm and

the flashing symbol S3. Preset times have to be corrected

and adjusted (the best procedure is to turn button 1 into the

position "manual" and repeat the complete procedure).

Alarm timer

To activate the timer, turn button 1 to the position "timer".

This timer functions only as a warning signal and does not

switch off the oven.

Set the desired time by turning button 2 towards "+" or "-".

Symbol S2 is on.

Once the desired alarm time is selected, the time countdown

starts after the 7 second lapse. If button 1 remained in the

position "timer" the display indicates the countdown of preset

time.

The remaining time may be corrected with button 2, while

button 1 must remain in the position "period of operation".

The expiry of the set period is signaled by the alarm, which is

switched off automatically after 7 minutes, if it was not

switched off before by turning button 1 in any position other

than the actual one. The symbol S2 is off.

Button (1) in the position of current time

This position is neutral and indicates current time. It is used

in case you wish the current time to be indicated on the

display. The clock is for example set to automatic operation.

If button 1 is set to the position "end" the display reads the

end of operation time, and if button 1 is turned to the position

"current time" the display will read current time.

Sound alarm volume

When all functions are off (only the current time is displayed)

it is possible to select 3 different volume settings of the sound

signal. Turn button 1 to the position "manual" and wait for 7

seconds. If button 2 is turned prior the expiry of this period,

the current time will be altered! Next, turn button 2 towards "-

" and keep it in this position. The first volume level is

sounded. Release button 2 and turn again towards "-" for the

next volume level, etc.

The last selected level is stored as default. Volume level may

be reset anytime.

Deleting all timer adjustments

All the time settings except the alarm timer may be deleted at

any time by turning button 1 to the position "manual".

Preset programs are automatically cancelled and the clock

returns to the conventional (manual) mode.

Using the clock in combination with oven

To use the clock in combination with oven, the first step

is to switch the oven on and set the desired baking mode

and the temperature. Only after that you may proceed

setting the clock functions. After the completion of

baking switch the oven off.

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE

OPERATION OF THE APPLIANCE..

Timer per la programmazione IT

1 manopola per scelta funzioni

2 manopola per impostazioni (+) e (-)

Descrizione dei simboli:

posizione ‘manuale’

posizione ‘contaminuti’

posizione ‘durata’

posizione ‘fine’

posizione ‘ora esatta’

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje k 7709 e inox Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info