Bedienungsanleitung Gorenje K7306E (Seite 17 von 19) (Englisch)

512711

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Instructions for use, installation and connection

Cooking zone burner (fig. 1 )

1 Burner crown cap

2 Burner crown with

burner cap support

3 Thermal probe

4 Ignition plug

5 Nozzle

Triple-ring burner (fig. 2)

5 nozzles

Safety gas faucet (fig. 3)

13 Setting screw for

minimum heat input

rate

Non-safety gas faucet (fig. 3a)

13 Setting screw for

minimum heat input

rate

Elements to be replaced or reset when altering the type of

gas

Cooking zone burner Fig. number Element code

Nominal heat input

1, 2 5

Minimum heat input

3, 3a 13

Electrical connections

Open the connection box using the screwdriver, as

shown by the drawing on the cover.

Connection to the mains power can be done only by

the authorized service center or by qualified

personnel!

Wrong connection may damage the parts of appliance and

render your warranty viod!

Connecting voltage of the user’s installation (230 V against N)

must be verified by qualified electrician using the appropriate

tester.

Connector bridges must be positioned in accordance with

the installation connection!

• Prior connecting the appliance, check whether the voltage of

the rating plate corresponds to the actual voltage of home

installation.

• Length of the power lead must be at least 1.5 m so that the

appliance can be connected to power before pushing it

against the wall.

• Length of the earthing lead must be longer than the others,

so that it is strained later than the tension power leads in

case of accidental pullout from the socket.

Procedure

• Using the screwdriver open the connection box cover at the

back of the appliance. You can do so by releasing two

catches, as shown on the connection box cover.

• Power cable must be guided through the relief device,

protecting it from pulling out. If the relief device has not been

fixed yet, fix it in such way to hook the power cable to the

device housing at one end.

• Now connect the power cable in accordance to one of the

options shown on the figure. In case of different installation

voltages, the connection bridges should be rearranged

accordingly!

• Tighten the relief device and close the connection box cover.

NOTE:

In some connection boxes the connector bridges are placed

between contacts 4 and 5, and in the others they are stored at

a designated place within the box. These boxes have the

connection screws already in open position so they need not

be unscrewed. During the tightening procedure you will hear a

faint “click”, meaning that the tightening screw should be

fastened tightly all the way.

Colored power leads

L1, L2, L3 = exterior power leads under tension. Usual colors

are black, black, brown.

N = neutral lead

Usual color is blue.

Watch for the correct N-connection!

PE = earthing (protective lead)

Lead color is green-yellow.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje K7306E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info