Depending on the nature of the ingredients, the
bowl (4) with its cover can be used to prepare
up to 2 kg of dough.
Before using for the first time, clean all parts of
the accessories with soapy water rinse and dry.
Press button (2) to release the multifunction
head (5) and raise it to a vertical position.
Fit the bowl(4) onto the appliance by turning
until it locks in position and place the
ingredients in it ,weighting them as indicated
under the weighing function.
Position the cover on the bowl with the filling
opening at the front of the appliance.
Fit the desired accessory (6), (7), (8) in the
power outlet, pushing the shaft of the
accessory home and turn it a quarter towards
you to lock it in position.
Lower the multifunction head of the appliance
to horizontal position and press button again
(you will hear a click).
During preparation, you can add ingredients
through the opening of the cover.
To stop the appliance, turn the knob (1) back to
0.
Place the appliance on a flat, clean and dry
surface and then plug in your appliance.
USING BLENDER:
Install the jar sealing ring over the blending
blade assembly.
Install the blending blade assembly over the jar
base.
Attach the jar base to the jar by turning it in the
direction of the arrow.
Put the ingredients that are not bigger than 2
centimeter in the jar.
Press the lid into place.
Install the jar onto the base.
Tips: While the motor is running, if you want to
add ingredients you can:
I:Turn the inner lid off the lid in the direction of
anticlockwise
II. Add the ingredients into the jar through the
opening in the lid
After you have done you work, push ”ON / OFF
button”, unplug the appliance, and pour out the
content.
