Bedienungsanleitung Gorenje SIH 2200PC (Seite 18 von 31) (Englisch, Dänisch, Polnisch)

729311

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

 Do not roll the power cord around the

iron for storage until it has cooled down

completely.

 Do not attempt to open the cabinets or

dismantle any parts from the iron; there is

no serviceable part inside.

 The iron must be used and rested on a

stable surface

 The iron is not to be used if it

has been dropped, if there are

visible signs of damage or if it

is leaking.

HOW TO FILL WATER

Fill the water tank with tap water up to the maximum

level by means of the filling cup.Do not fill the tank

beyond the MAX indication. If the tap water in your

area is very hard, we advise you to use distilled water.

BEFORE FIRST USE

Set the required ironing temperature by turning the

temperature dial to the appropriate position.

Check the laundry care label for the required ironing

temperature:

● Synthetic fabrics (e.g. acrylic, nylon,

polyamide, polyester)

●● Silk,Woll

●●● Cotton, linen

DRY IRONING

Adjust The Variable Steam Control/Self Cleaning

Knob to minimum position "o" (picture 3).

Turn the Temperature Dial in clockwise direction;

select ‘●’ (1 dot), ‘●●’ (2 dots) or‘●●●’ (3 dots)

according to the recommendation of garment label.

STEAM IRONING

Make sure that there is enough water in the water

tank. Select the recommended ironing temperature.

Select the appropriate steam setting. Make sure that

the steam setting you select is suitable for the ironing

temperature selected :

● for moderate steam (picture 3)

● for maximum steam (picture 4 )

SPRAY FUNCTION

You can use the spray function to remove stubborn

creases at any temperature.

Make sure that there is enough water in the water

tank.

Press the spray button several times to moisten the

article to be ironed.(picture 5)

BURST OF STEAM (picture 6)

A powerful shot of concentrated steam helps remove

stubborn creases.The forward-directed concentrated

shot of steam enhances the distribution of steam into

every part of your garment.The shot-of-steam

function can only be used at temperature settings

between ●● and MAX. 1 Press and release the shot-

of-steam button .Betwen every shot wait for few

seconds.

VERTICAL SHOT OF STEAM

The shot-of-steam function can also be used when

you hold the iron in vertical position.This is useful for

removing creases from hanging clothes, curtains etc.

Hold the iron betwen 15 and 30 centimeters away

from the garment .(picture 7)

Never direct the steam towards people.

DRIP STOP

This iron is equipped with a drip-stop function: the iron

automatically stops producing steam when the

temperature is too low to prevent water from dripping

out of the soleplate.When this happens you may

hear a sound.

AUTOMATIC ANTI-CALC SYSTEM

The built-in anti-calc system reduces the build-up of

scale and guarantees a longer life for the iron.

ELECTRONIC SAFETY SHUT-OFF

FUNCTION

The electronic safety shut-off function automatically

switches off the iron if it has not been moved for a

while. The red auto-off pilot light starts blinking to

indicate that the iron has been switched off by the

safety shut-off function.To let the iron heat up again,

pick up the iron or move it slightly. The red auto-off

pilot light goes out. If the temperature of the soleplate

has dropped below the set ironing temperature, the

temperature pilot light goes on.

SELF CLEAN BUTTON

This function removes the scales and minerals built

up in the Steam Chamber. The iron will remain in the

best condition if this function is performed at least

once a month or more regularly depending on the

hardness of the water used.Turn the Temperature

Dial in clockwise direction to ‘●●●’ setting.

Pilot light goes off when the required temperature is

reached.Wait for one more cycle; pilot light glows and

goes off.Turn the Temperature Dial in anti-clockwise

direction to ‘Min’. Disconnect the iron from mains

supply outlet.Hold the iron horizontally over a sink.

Push and hold the SELF-CLEAN Knob (2) (D.Steam

and boiling hot water will drain from the holes on the

soleplate washing away the scales and minerals that

have built up inside the Steam Chamber.

Gently move the iron back and forth until the water

tank is empty. When Self-Cleaning is complete,

release the Steam Control/Self-Cleaning Knob.Rest

your steam iron back on its heel rest and allow to fully

cool down.

Wipe the soleplate with a cold damp cloth.

Caution:

 For safety reasons it's best to fit or remove it

when the iron is totally cold.

 Always remove the textile protector after each

use to let the inside dry out completely.

 Always clean the iron after every use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje SIH 2200PC Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info