Bedienungsanleitung Gorenje SIT2400CGI (Seite 19 von 26) (Englisch, Polnisch)

729322

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Check the laundry care label for the required ironing

temperature:

● Synthetic fabrics (e.g. acrylic, nylon, polyester)

ACRYL-NYLON

●● Silk,Wool, , polyamide

SILK-POLY-BLEND-WOOL

●●● Cotton, Jeans

COTTON-JEANS

MAX•••Linen

LINEN

DRY IRONING

Adjust The Variable Steam Control/Self Cleaning

Knob to minimum position " " .

Adjust the Temperature to ‘●’ (1 dot), ‘●●’ (2 dots)

or‘●●●’ (3 dots), MAX•••

according to the recommendation of garment label.

STEAM IRONING

Make sure that there is enough water in the water

tank. Select the recommended ironing temperature.

Select the appropriate steam setting. Make sure

that the steam setting you select is suitable for the

ironing temperature selected :

 for moderate steam select the appropriate steam

settings

 for maximum steam

SPRAY FUNCTION

You can use the spray function to remove stubborn

creases at any temperature.

Make sure that there is enough water in the water

tank.

Press the spray button several times to moisten the

article to be ironed.(picture 5)

BURST OF STEAM (picture 6)

A powerful shot of concentrated steam helps

remove stubborn creases.The forward-directed

concentrated shot of steam enhances the

distribution of steam into every part of your

garment.

The shot-of-steam function can only be used at

temperature settings between ●● and MAX. 1

Press and release the shot-of-steam button

.Betwen every shot wait for few seconds.

VERTICAL SHOT OF STEAM

The shot-of-steam function can also be used when

you hold the iron in vertical position.This is useful

for removing creases from hanging clothes, curtains

etc. Hold the iron betwen 15 and 30 centimeters

away from the garment . (picture 7) . Never direct

the steam towards people.

DRIP STOP

This iron is equipped with a drip-stop function: the

iron automatically stops producing steam when the

temperature is too low to prevent water from

dripping out of the soleplate.When this happens you

may hear a sound.

AUTOMATIC ANTI-CALC SYSTEM

The built-in anti-calc system reduces the build-up of

scale and guarantees a longer life for the iron.

ELECTRONIC SAFETY SHUT-OFF

FUNCTION

The electronic safety shut-off function automatically

switches off the iron if it has not been moved for a

while. The red auto-off pilot light »II« will flash

indicate that the iron has been switched off by the

safety shut-off function.To let the iron heat up again,

pick up the iron or move it slightly.The red auto-off

pilot light goes out. If the temperature of the

soleplate has dropped below the set ironing

temperature, the temperature pilot light goes on.

SELF CLEANING

This function removes the scales and minerals built

up in the Steam Chamber. The iron will remain in

the best condition if this function is performed at

least once a month or more regularly depending on

the hardness of the water used. Adjust with control

button temperature to ‘●●●’ setting.Pilot light goes

off when the required temperature is reached.

Wait for one more cycle; pilot light glows and goes

off.Adjust the temperature to ‘Min’. Disconnect the

iron from mains supply outlet.

Hold the iron horizontally over a sink. Push and hold

the Self-Cleaning Knob 10 (Descaling) .Steam and

boiling hot water will drain from the holes on the

soleplate washing away the scales and minerals

that have built up inside the Steam Chamber.

Gently move the iron back and forth until the water

tank is empty. When Self-Cleaning is complete,

release the Steam Control/Self-Cleaning Knob.Rest

your steam iron back on its heel rest and allow to

fully cool down.

Wipe the soleplate with a cold damp cloth.

DRAINING THE WATER

Move the Steam Control/Self-Cleaning Knob to

position " " .Disconnect the iron from the mains

supply outlet.Press the Burst Of Steam button to

release any trapped water when the soleplate still

hot. Press the Spray Buttons to release any trapped

water. Hold the iron upside down and gently shake

it to remove the remaining water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje SIT2400CGI Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info