603637
12
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
12
CAUTION: Before any intervention into the interior of the water heater, disconnect it
from the power supply network!
OPERATION AND MAINTENANCE
After connecting to the water and power supply, the heater is ready for use.
The heater is equipped with an electronic regulator that enables the setting of the
temperature of water, adjustment of the heater’s operation to your habits ("ECO
S
"
programme) and troubleshooting application.
OPERATION
The water heater is operated by turning the regulation knob to the desired level.
Switching on/off the heater
To switch on the heater, turn the knob in the clockwise direction to reach the desired
temperature level.
To switch off the heater, turn the knob to the "0" position (if the heater is disconnected
from the power supply, water must be drained from it in case of danger of freezing).
Temperature setting
The desired temperature level is set by turning the knob in the clockwise direction.
ECO
S
- Temperature depends on the recorded needs of the user.
- Protection against freezing, temperature around 10 °C.
- Water temperature around 35 °C.
ECO - Water temperature around 55 °C.
- Water temperature around 75 °C.
The operation of the heater in the "ECO
S
" mode
This mode of operation is suitable if your hot water consumption habits are relatively
consistent (example: taking a shower at approximately the same time of the day). Your
habits are recorded and then taken into account when heating the water. The operation of
the heater in the "ECO
S
" mode reduces the consumption of electric energy.
The "ECO
S
" mode of operation can be switched on by twisting the control knob counter
clockwise. The green and red light start simultaneously. The red light symbolises the
functioning of the heater and the green light symbolises the “ECO
S
” mode.
The "ECO
S
" function is based on a 7-day cycle. During the first week of operation, the
water temperature in the heater is maintained at 75 °C and the programme records the
EN
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

gorenje-tgr-30-120-sm--uni

Suche zurücksetzen

  • Gorenje Boiler oGB 120 E30 edd/uni was bedeutet Fehlercode E6 ist im Handbuch nicht bechrieben ? Eingereicht am 24-4-2017 06:51

    Antworten Frage melden
  • Boiler oGB 120 E30 edd/uni was bedeutet Fehlercode E6 ist im Handbuch nicht bechrieben ? Eingereicht am 24-4-2017 06:43

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gorenje TGR 30-120 SM -UNI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info