Bedienungsanleitung Gorenje VCEA21SBKR (Seite 19 von 53) (Englisch, Polnisch)

729267

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

• Never use your vacuum cleaner for

vacuuming the building material (such as

fine sand, lime, cement dust etc.). Absorbed

building material can damage your

appliance.

• When you are using the vacuum cleaner

together for several hours, pull the

connecting cable to the end.

• Noise level: Lc < 71 dB(A)

CAUTION: Never use the vacuum cleaner

without the filters.

Vacuum cleaner use only for home and in the

inner rooms!

Do not use a vacuum cleaner in very dirty

places, it will immediately obstruct HEPA

filter!

Connection to the mains

supply

Check, please, whether the voltage stated on the

data plate comply with the data of your house

mains supply.

Supply cord

If the supply cord is damaged, it must be

replaced with the suitable cord, or a set for

coiling the cable, which you can get in the

nearest Gorenje’s service outlet.

If the mains cord is damaged, you must have it

replaced by Gorenje, a service centre authorised

by Gorenje or similarly qualified persons in order

to avoid a hazard.

Data on compliance with

european standards

Test for this type of appliance confirmed that it

complies with the following European directives:

• 2006/95/EEC Low voltage

• 93/68/EEC CE Marking

• 2004/108/EEC Directive on Electromagnetic

Compatibility – EMC

This appliance is marked according to the

European directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE).

This guideline is the frame of a European-wide

validity of return and recycling on Waste

Electrical and Electronic Equipment.

Elimination of the appliances

and environment

If one day you decide to change your appliance,

or you just do not need it any more, think about

the environmental protection.

Vacuum cleaner assembling

Always remove the plug from the power supply

before fitting or removing accessories. Before

putting the appliance into service, please check if

all filters are inserted correctly.

ASSEMBLY OF THE SUCTION HOSE

• Insert the flexible suction hose into the

connection opening at the top of the

housing until you can feel it lock.

HOSE REMOVING

• To remove flexible hose from the vacuum

cleaner, press the buttons situated on the

flexible hose base, then pull to remove it

from the attachment point.

ROLLING THE CABLE OUT AND UP

• Pull out the cable to such a length that easy

working is ensured. Now connect the

appliance to the main supply. Press the

switch to activate the automatic rewinder

and hold on the mains plug for safety

reason.

FITTING TUBE AND ACCESSORIES

- Extend the tube to the desired length by

pressing on button.

- Insert a flexible hose into a tube.

- Fit a nozzle to tube:

- Floor brush is intended for cleaning

bare floor and floor coverings.

- Crevice/furniture nozzle is for cleaning

corners and between cushions.

According to the mark rotate the nozzle

to brush position to clean curtain or

dust on the decorating surfaces.

Instruction for use

• Before using the appliance, unwind a

sufficient length of cord and insert the plug

into the power supply.

• Press the On/Off button to switch the unit

on. To stop it press the On/Off button again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje VCEA21SBKR Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info