Bedienungsanleitung Gorenje wa 64163 al (Seite 4 von 32) (Englisch)

313443

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

141576

• Be sure to remove transport brackets prior ﬁ rst use of the appliance. Attempted operation of the

blocked machine may result in irreparable damage which is not covered by the manufacturer’s

warranty!

• When connecting your washing machine to water supply, be sure to use brand new water inlet

hose and appropriate sealing gaskets (attached).

• Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be

damaged if frozen.

• Install the washing machine in a perfectly horizontal position, on solid ﬂ at concrete ﬂ oor.

• Follow the instructions for correct installation and water and mains connections.

• Never immerse the end of the drain hose into the draining water.

• Prior starting the washing cycle lock the door by pressing them at the designed spot.

• Door may not be open during the washing cycle.

• Use only detergents and softeners for machine wash. Manufacturer may not assume

responsibility for any damage and eventual discoloring of gaskets and plastic components as a

consequence of incorrect use of bleach and/or coloring agents.

• For removal of lime residues use such agents with added anti-corrosion agents. Follow the

manufacturer’s instructions. Finish the lime removal by multiple rinsing to remove completely

eventual acid residues.

• Never use detergents containing solvents, since there is a danger of creating toxic gasses which

may damage the machine and result in ignition or explosion.

• Upon completion of washing operation close the water faucet.

• Before any transport block the machine by inserting at least one transport blocking rod. Prior this

operation disconnect the appliance from the mains power!

• Rating plate with basic information is located above the opening of the machine.

• The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color,

increased noise level as a consequence of appliance age, which does not affect appliance

functionality, and aesthetical deﬁ ciencies which do not affect appliance functionality or safety.

Before connecting the appliance read these instructions carefully. Repairing the failure

arising from inappropriate connections or use of the appliance is not covered by the

guarantee.

The belt can be replaced by a servising engineer only, who incorporates an original

spare part with the marking MIG OPTIBELT 6EPJ 1260, code 111622 or 6EPJ 1278 code

587612.

The symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By

ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of thisproduct. For more

detailed information about recycling of this product, please contact your local city

ofﬁ ce, your household waste disposal service or the shop where you purchased the

product.

Cautions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje wa 64163 al Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info