786711
42
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
604197
42
INTERRUPTIONS AND CHANGING
THE PROGRAMME
MANUAL INTERRUPTION
To stop and cancel a washing programme, press the (1) ON/OFF/RESET button and hold it for
more than 3 seconds. Signal lights will flash on the display. At the same time, the washing machine
pumps the water out of the washing machine drum. When the water is pumped out, washing
machine door will be unlocked. If the water in the washing machine is hot, the washing machine will
automatically cool it and pump/drain it out.
PERSONAL SETTINGS
Basic or default settings for each washing programme can also be changed. When you select the
programme and additional functions, you may store such combination by pressing the (3) START/
PAUSE button and holding it for five seconds. S C will appear on the display.
The programme will remain stored until it is changed using the same procedure.
Personal settings can also be reset to factory settings in the user menu.
PERSONAL SETTINGS MENU
Switch on the washing machine by pressing the (1) ON/OFF/RESET button. Simultaneously press
the (6) PREWASH and (10) START DELAY positions to open the Personal Settings Menu.
Signal lights for POWERCARE, TIMECARE, and WATER+ (HIGH WATER LEVEL) will light up
on the display unit. Number 1 will appear on the LED display, which also indicates the settings
function. Rotate the programme selector knob (2) to the left or to the right to choose the function
to change. Number 1 indicates sound settings and number 2 indicates resetting of Personal
programme settings to factory defaults. If the desired settings are not selected in 20 seconds, the
programme will automatically return to main menu. Press the (7) SPIN (SPINNING RATE/DRAIN/
PUMP STOP) position to confirm the desired functions and their settings; press the (6) PREWASH
position to go back one step. Acoustic signal volume can be set at four levels (0 means the
sound is off; 1 means that the button sound is activated; 2 means low volume, and 3 means high
volume). Choose the volume level by rotating the programme selector knob (2) to the left or to the
right. The lowest setting means that the acoustic signal is switched off.
PAUSE BUTTON
The washing programme can always be stopped by pressing the (3) START/PAUSE button. The
washing programme is temporarily paused when the time remaining until programme completion
is flashing on the display unit . If there is no water in the drum and water temperature is not too
high, then the door will unlock after a certain period of time, and they can be opened. To resume
the washing program, first close the door and then press the key (3) START/PAUSE button.
604197en.indd 42604197en.indd 42 20. 02. 2021 08:40:4120. 02. 2021 08:40:41
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gorenje WE743 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info