Bedienungsanleitung Gorenje wt 921 (Seite 5 von 10) (Englisch)

303352

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

129737

Instructions for Use18

Drying

Drying programme selection clements are fited in

the control panel as well as the indicator light

which is on during the operation of the machine.

Preparing the Laundry for

Drying

x Sort the laundry before drying according to type

of the laundry.

x Do the buttons, zippers, join the strings and pull

out the pockets.

x Very delicate laundry (fine underwear with

laces) should prior to drying be put in a special

sack so that it won't get damaged by buttons,

zippers and pins.

x We recommend loading the drum with items of

different size. Larger pieces of laundry get

tucked during drying. So we recommend you

take them out, shake them and then put them

back.

x When drying large sheets (bed sheets, table

cloths) put 2 to 3 pieces for one load and when

drying delicate smaller items (shirts, blouses) fill

only 5 to 6 pieces for one load (max 2,5 kg).

x Never fill the appliance with drip wet laundry.

x Most clothes nowadays have labels marked

with recommended drying mode.

DRYING

Drying in tumble drier allowed

Wring, hang on rope and dry

No wringing, drip dry

Wring, dry flat

Drying in tumble drier not allowed

Drying at normal temperature

Drying at lower temperature

ON – OFF button

The appliance is switched on and off by pushing

the ON/OFF button.

Signal lamp operation

Signal lamp is on when the appliance is in

operation.

Prior drying

x Switch the dryer on by pressing the ON/OFF

button.

x Before first selection of drying program set the

program selection knob for 1 second to the

position STOP/0.

x Set the program selection button to the desired

drying program. Signal lamp, adjacent to the

selected program is lit (except with the selected

time program).

x Press the "START" button to start the program.

The beginning of operation is signaled by a

beep. The program signal light goes off and

actual humidity level indicator light turns on.

x If you wish to change the selected drying

program after the machine had been put in

operation, set the program selection button

back to the position STOP/0 for 1 second, and

after that you may select any desired drying

program, and start it by pressing the START

button. In case this procedure is not performed,

the machine will continue executing the

originally selected program, notwithstanding the

position of the program selector.

x If the preceding program has been completed

(indicator light END and ANTI-CREASE are lit),

you may select a new program and start it with

the START button. It is not necessary to set the

program selection button to the STOP/0

position.

Drying program selection button

The appropriate program is selected by operating

the program selector switch, which may be turned

in either direction. There is a basic choice of three

drying groups:

9 12 14 13

10 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje wt 921 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info