Bedienungsanleitung Gossen Metrawatt METRAHIT 18S (Seite 1 von 12) (Englisch)

571683

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Analog-digital multimeters

METRA 12S ... 18S, 14A

GOSSEN-METRAWATT 1

CAMIL

BAUER

TRAWATT

OSSEN

Automatic Blocking System (ABS) *

The automatic blocking system prevents incorrect connection of

the test leads and incorrect selection of the measured quantity.

This reduces danger to the user, the meter and the system to a

remarkable extent, and eliminates it in many cases.

Interface and software METRAwin 10

The multimeters are fitted with a serial RS-232 C interface via

which the measured values, the position of the operating controls

and the meter type can be transmitted to a PC by means of a

telegram. These values, electrically isolated, are transmitted to the

attachable interface adapter with infrared light through the case *.

MIN/MAX value storage

In addition to the display of the actual measured value, the mini-

mum or maximum value can constantly be updated and stored.

Indication of negative values on the analog scale

When measuring DC quantities, also negative values are shown

on the analog scale so that variations of the measured value can

be observed at the zero point.

Root-mean-square value with distorted waveform

(METRA

Hit

16S and 18S)

The measuring principle employed permits the measurement of

the root-mean-square value (TRMS) of AC quantities and mixed

quantities (AC and DC) regardless of the waveform.

Automatic data hold *

The DATA HOLD function makes it possible to hold the digitally

displayed measured value. According to a patented method, it is

ensured that no freak value but the actual measured value is held

in the case of rapid changes in measured quantities. The held

measured value appears on the digital display. The actual mea-

sured value continues to be shown on the analog scale.

Autoranging/manual range selection

The measured values are selected with the rotary switch.

The measuring range is automatically matched to the measured

value. The measuring range can also be selected manually via the

AUTO/MAN push-button.

Continuity test

This permits testing for short circuit and/or interruption. In addi-

tion to the display, a sound signal is possible.

Temperature measurement

It is possible to use all meters for direct connection of temperature

sensors, automatic identification of Pt 100 and Pt 1000 elements

as for temperature measuring ranges.

Overload warning

A sound signal reports violation of the overload limits.

Signalling in the case of a blown fuse

The display FUSE points to a blown fuse.

Power economizing circuit

The meter disconnects automatically when the measured value

remains unchanged for about 10 minutes and no operating con-

trol was operated during this time. The disconnection facility can

be disabled.

Protective holster for rough duty

A holster of soft rubber with tilt stand protects the meter against

damage in the case of shock and drop. The rubber material

makes for the meter to stand firmly even on a vibrating surface.

* Protected by patent rights

Top model METRA

Hit

18S

The top model METRAHit 18S features a 4 3/4 digit display

(31 000 digits) as well as the following additional functions:

Event counter, measurement of the duration of the event, total

time, time counter, data compare, MIN/MAX values with time rec-

ognition and wide-range capacitance measurement.

Calibration

The multimeters of the METRAHit S series can be calibrated auto-

matically via the RS-232 data interface with the aid of the multi-

function calibrator METRAtop 90C and the METRAwin 91 soft-

ware.

Training

We offer interesting seminars with practical training on the topic

"Correct measurements in adverse environmental conditions

(EMC) with multimeters and PC". The seminars are in German.

These seminars also provide detailed information on the operation

of the METRAHit 18S including the METRAwin 10 software and

also deal with the actual measurements specified by DIN VDE.

Mark approvals

Applied rules and standards

IEC 1010-1

DIN EN 61010 part 1

VDE 0411-1

Safety requirements for electrical equipment

for measurement, control and laboratory use

DIN 43 751 Digital measuring instruments

DIN EN 50081 part 1 Generic emission standard;

residential, commercial and light industry

DIN EN 50082 part 1 Generic immunity standard;

residential, commercial and light industry

VDI/VDE 3540 Reliability of measuring and control equipment

DIN EN 60529

DIN VDE 0470 part 1

Test equipment and test procedures

– Degrees of protection provided by enclosures (IP Code)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt METRAHIT 18S Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info