590622
21
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
GMC-I Messtechnik GMBH 21
GB
8.6 Transmission Mode Operation with RS 232 or USB Interface
The METRA HIT27EX is equipped with an bidirectional
infrared interface for the transmission of measurement data
to a PC. Data are transferred optically through the
instrument housing by means of infrared light to an
interface adapter (accessory BD232 or USB-HIT), which is
attached to the instrument. The adapter’s RS 232 or USB
interface allows for the establishment of a connection to
the PC via an interface cable. Beyond this, commands and
parameters can be transmitted from the PC to the
instrument as well. The following functions can be
executed:
Configuration and read-out of measuring parameters
Measuring function and measuring range selection
Start measurements
Read out measured values.
Activating the Interface
The interface is switched on manually as described below
for transmission mode operation. The instrument
continuously transmits measurement data to the PC via the
interface adapter in this operating mode. The interface is
activated automatically by the PC for receiving operation
(i.e. the instrument receives data from the PC).
Starting Transmission with Menu Functions
InFO SEnd StArt
The symbol blinks at the display in order to indicate
interface operation.
Automatic Activation and Deactivation of the Transmission Mode
If the sampling rate is 20 s or longer, the display is
switched off automatically between samples in order to
prolong battery service life.
Exception: continuous operation
As soon as an event occurs, the display is automatically
switched back on.
Configuring Interface Parameters
Addr – Address
If several milliohmmeters are connected to the PC via inter-
face adapters, an unique address must be assigned to
each device. Address 1 should be used for the first device,
address 2 for the second etc. If only one milliohmmeter is
utilized, an address between 1 and 14 should be used.
Address 15 is not used for addressing, i.e. the device with
address 15 always responds, regardless of the actual
address.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRAHIT 27EX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info