590625
18
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
18 GMC-I Messtechnik GmbH
Control Functions
4 Control Functions
4.1 Selecting Measuring Functions and Measuring Ranges
The rotary switch is linked to the automatic socket blocking
mechanism, which only allows access to two connector jacks for
each function. Be certain to remove the appropriate plug from its
respective jack before switching to and from the “Afunctions.
The socket blocking mechanism prevents the user from inadver-
tently turning the selector switch to impermissible functions after
the measurement cables have been plugged into the instrument.
Presence of Dangerous Touch Voltages
If dangerous volt-
ages are applied in
the high-imped-
ance voltage mea-
suring functions
(switch position V
or PQ), switching
to low-impedance
measuring func-
tions (switch posi-
tion MHz, Ω, conti-
nuity, temperature
or capacitance)
causes “HiVoLt” to
appear at the dis-
play and the re-
spective measure-
ment is disabled. The measuring function is not switched until
dangerous touch voltage is no longer applied to the input. If the
instrument switches itself off in the event that hazardous touch
voltage is applied (during memory mode operation with large
sampling period), the high-voltage warning symbol remains visible
at the display.
4.1.1 Automatic Range Selection
The multimeter is equipped with auto-ranging for all measuring
functions, except for temperature measurement and diode and
continuity testing. Auto-ranging is active as soon as the instru-
ment is switched on. The instrument automatically selects the
measuring range which allows for highest possible resolution of
the applied quantity.
AUTO-Range Function
The instrument is switched automatically to the next higher range
at ±(310,000 d + 1 d) 031,000 digits, and to the next lower
range at ±(28,000 d – 1 d) 27,999 digits.
The instrument automatically switches to the next higher or next
lower measuring range for the following measured quantities:
230
.
00
V
050
.
00
AC
TRMS
Hz
U > 45 V:
V~
V
V
Ω
Temp
TC
Temp
RTD
hivolt
Measuring Range
Reso-
lution
Switching to Next
Higher Range
at ±(... d + 1 d)
Switching to Next
Lower Range
at ±(... d -1 d)
V, A, Ω, Hz 310,000 28,000
V , V , A , A 31,000 2800
3 nF ... 3 mF 3100 280
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRAHIT ULTRA BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info