Bedienungsanleitung Gossen Metrawatt METRAHIT ULTRA (Seite 71 von 74) (Englisch)

590624

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

GMC-I Messtechnik GmbH 71

Accessories

10.4 Interface Accessories (not included)

10.4.1 Infrared Interface

USB X-TRA Bidirectional Interface Adapter

STARLINE multimeters which are equipped with a serial IrDa inter-

face can be connected to a USB port at a PC with the adapter.

The adapter allows for data transmission between the multimeter

and the PC.

METRAwin10 PC Evaluation Software (for METRAHIT ULTRA

as of 2013)

METRAwin10 PC software is a multilingual, measurement data log-

ging program for recording, visualizing, evaluating and document-

ing measured values from METRAHIT multimeters.

10.4.2 Bluetooth Interface

USB Bluetooth Adapter for PC

The following Bluetooth adapters for communication between

METRAHIT ULTRA and PC have been successfully tested so far:

Belkin F8T016NG and LOGI LINK BT0007

Bluetooth adapters by other manufacturers should fulfill the fol-

lowing technical minimum requirements:

Bluetooth 2.1 + EDR, class 2

Terminal program for PC

Indication and evaluation of the measured values received via a

Bluetooth adapter can be effected via a terminal program.

METRALOG App for Smartphone and Tablet PC

Provided you have a smartphone or tablet PC with Android oper-

ating system and Bluetooth interface, our METRALOG app in com-

bination with the METRAHIT ULTRA BT TRMS Digital Multimeter of-

fers the following functions:

• Indication of measured values received from the multimeter as:

digital or analog values, measured value curve Y(t)

and measured value logger

• Recording of measuring transactions

• Transmission of logs via wireless and network services

• Acoustic warning signal when radio contact is interrupted

• Trigger for exceeding/falling short of adjustable limit

• SMS and/or acoustic warning signal for trigger event

The

METRALOG

app can be obtained via the Google

Play Store (see

code on the right) and installed on

your smartphone or tablet PC (Operating System

minimum Android 2.3.3).

Attention:

For any errors in

the software especially through interaction with other

applications, any liability is excluded.

Short-form Instructions

1 Touch the app icon to start the program.

2Select METRAHIT ULTRA BT from the list of recivable Bluetooth devices.

The following message is displayed: „Bluetooth connection to measuring

instrument being established“.

3 To establish the radio communication, enter the same pin you have already

entered for the interface parameter

bt pin

of the multimeter, see section 7.2.

When the connection has been successful, an analog display appears in which

the following message is shown at the bottom right „Measurement in process“.

4 You can switch between digital display, measured value curve Y(t) and ana-

log display in the bottom line on the left.

5 By touching the REC symbol, you can start or stop the recording of the

measured values.

6 Touching the magnifier symbol in the bottom line on the right takes you to

the measured value logger overview where you can select measuring inter-

vals for graphic representation of for transmission.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt METRAHIT ULTRA Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info