590611
12
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
12 GMC-I Messtechnik GmbH
6 Voltage and Frequency Measurement
Set the rotary switch to either V (TRMS) or V , depending upon the
voltage to be measured.
You can switch back and forth between voltage and frequency
measurement in the V
switch position by pressing the FUNC key.
Connect the measurement cables as shown. The jack must be grounded.
Note!
An intermittent acoustic signal warns the operator if the measured value
exceeds the measuring range upper limit in the 600 V range.
Attention!
!
Make certain that neither of the current measuring range is selected
(“A”) and that the measuring cables are connected to the right “V” und
” jacks when the multimeter is connected for voltage measurement!
Both the operator and the instrument are in danger if the breaking
thresholds for the fuses are exceeded due to operator error!
Zero Balancing in the
300 mV Measuring Range
Select the 300 mV
measuring range.
Connect the measure-
ment cables to the instru-
ment and connect the
free ends to one another.
Briefly press the FUNC key.
The instrument acknowledges
zero balancing with an
acoustic signal, and “000
.00
(1 digit) and the ZERO
symbol appear at the LCD.
The voltage displayed at the moment the key was pressed is used as a reference
value (max. 2000 digits which
corresponds to 20 mV).
This value is automatically subtracted from all subsequently measured values.
Zero balancing can be cleared:
– by pressing and holding the FUNC key,
after which clearing is acknowledged by
– a twice repeated acoustic signal,
by switching the instrument off.
– (+)
~
+ (–)
~
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt METRAport 40S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info