Bedienungsanleitung Gossen Metrawatt METRISO TECH (Seite 30 von 40) (Englisch)

590647

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

30 GMC-I Messtechnik GmbH

12.2.2 Electronic Fuse

This fuse protects low-resistance (Rlo) and resistance measure-

ments (kΩ) from overloading (electronic hardware circuit).

„EL.Fu“ appears when the fuse blows.

Ð Eliminate the cause of overloading. This error message must

be cleared by switching to OFF position.

12.3 Housing

No special maintenance is required for the housing. Keep outside

surfaces clean. Use a slightly dampened cloth or a plastic cleaner

for cleaning. Avoid the use of cleansers, abrasives or solvents.

Return and Environmentally Sound Disposal

The instrument is a category 9 product (monitoring and control

instrument) in accordance with ElektroG (German electrical and

electronic device law). This device is subject to the RoHS direc-

tive. Furthermore, we make reference to the fact that the current

status in this regard can be accessed on the Internet at

www.gossenmetrawatt.com by entering the search term WEEE.

We identify our electrical and electronic devices in

accordance with WEEE 2012/19/EU and ElektroG

using the symbol shown at the right per DIN EN 50419.

These devices may not be disposed of with the trash.

Please contact our service department regarding the return of old

devices (see address in section 15).

If you use

batteries

rechargeable batteries

in your instrument or accesso-

ries which no longer function properly, they must be duly disposed of in

compliance with the applicable national regulations.

Batteries or rechargeable batteries may contain harmful substances or

heavy metal such as lead (PB), cadmium (CD) or mercury (Hg).

They symbol shown to the right indicates that batteries or

rechargeable batteries may not be disposed of with the

trash, but must be delivered to collection points specially

provided for this purpose.

13 Recalibration

The measuring tasks performed with your instrument, and the

stressing it’s subjected to, influence aging of its components any

may result in deviation from the specified levels of accuracy.

In the case of strict measuring accuracy requirements, as well as

in the event of use at construction sites with frequent stress due

to transport and considerable temperature fluctuation, we recom-

mend a relatively short calibration interval of once per year. If your

instrument is used primarily in the laboratory and indoors without

considerable climatic or mechanical stressing, a calibration inter-

val of once every 2 to 3 years is sufficient as a rule.

During recalibration* at an accredited calibration laboratory (DIN

EN ISO/IEC 17025), deviations from traceable standards demon-

strated by your measuring instrument are documented. Ascer-

tained deviations are used to correct displayed values during later

use of the instrument.

We would be happy to perform DAkkS or factory calibration for

you at our calibration laboratory. Further information is available at

our website:

www.gossenmetrawatt.com (→ Company → DAkkS Calibration

Center or → FAQs → Question and Answers Regarding Calibra-

tion).

Recalibration of your instrument at regular intervals is essential for

the fulfillment of requirements according to quality management

systems per DIN EN ISO 9001.

* Examination of the specification, as well as adjustment, are not included in calibra-

tion. However, in the case of our own products, any required adjustment is per-

formed and adherence to the specification is confirmed.

Pb Cd Hg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt METRISO TECH Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gossen Metrawatt METRISO TECH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info