Bedienungsanleitung Gossen Metrawatt SECULIFE ES XTRA (Seite 123 von 130) (Englisch)

590784

123

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

GMC-I Messtechnik GmbH 123

SECULIFEESXTRA

FREQUENTLY ASKED QUESTIONS (FAQ)

Question Answer

What are the new features in the 2.0.3.15

software?

There are many new features, see the User's manual for details.

• Added secure autosequence for ForceTriad PM procedure

• Option to select details or summary data when saving Autose-

quence results to PDF files

• RS-232 terminal window shows mA measurement and can set

load

• New secure autosequence, once saved as secure sequence, the

settings can't be modified by user

• Copy Step function added to Autosequence configuration

• Changed colors to help identify RF Measure and RF Leakage

screens

• Added ground referenced measurement mode for RF Measure

screen

• Added network drive access to file open/save

• Added sort by filename or date to file open/save

I am trying to take a measurement, why do

the readings frequently bounce to zero?

Chances are you are trying to read a pulsed waveform. Try setting

the measurement mode to 'Pulsed' instead of 'Continuous'.

How do I measure a bipolar output when

there is only a REM and Active cable

provided?

Initial units were only shipped with two active leads, Green and

Yellow. Use the Yellow active cable to connect from the Active port

on the SECULIFE ES

XTRA to one bipolar output on the DUT. Use

the Green cable to connect from Dispersive 1 on the SECULIFE

XTRA to the other bipolar output on the DUT.

Starting with Rev G units, a Blue wire was added to the accessory kit.

The Yellow and Blue wires can be used to measure bipolar outputs.

Why aren't there more pre-programmed

autosequences provided with the

SECULIFE ES

XTRA?

We have been restricted by the ESU manufacturers from including

autosequences with the SECULIFE ES

XTRA. However, the

Quickstart guide can help with configuring autosequences.

I just want to use the SECULIFE ES

XTRA

to measure current and don't need all of

the other features. Is there an easy way to

do this?

Yes, you can use profiles to configure the SECULIFE ES

XTRA to boot

to any screen. Select System Tools from the main screen, then

System Setup. The Startup Screen can then be selected and saved

to a profile.

How do I enter text for the Autosequence

title or instructions to user?

Click in the text box to be edited. To enter text, you will need an

external USB or PS/2 keyboard. You can also enter the text from

your PC using the Remote mode.

What is the tissue test, how is it used?

Some generators have the ability to seal tissue and detect when the

seal is made. These generators use a changing load impedance to

detect the seal. The tissue response test uses a light bulb as a load

to simulate changing tissue impedance. This mode will monitor the

current and report the value right before the output is turned off.

What is pulsed input mode for? Isn't Coag

a pulsed waveform?

Pulsed mode is for measuring outputs that have a relatively long duty

cycle such as 20mS off, 500mS on. Typically, the generator will

have a special button to enable the pulsed output mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt SECULIFE ES XTRA Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info