Bedienungsanleitung Gossen Metrawatt SECULIFE SB (Seite 6 von 160) (Englisch)

590773

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

6 GMC-I Messtechnik GmbH

Applications and Regulations

1 Applications

The test system has been developed for user-controlled

execution of approvals, routine tests and periodic testing in

accordance with legally specified directives (e.g. BGV A3 –

previously BGV A2 and VBG4 –, GUV A2, MPG, BetrSichV,

Brandschutz etc.). Individual work steps are combined by the user

into complete work sequences to this end. Test sequences

created in this way are then executed in a user-controlled fashion.

Test sequences, including all required measurements in accor-

dance with the following standards, have been predefined:

DIN VDE 0701- 0702

In addition to this, the modular test system allows for the integra-

tion of testing tasks through the connection of sensors, e.g. for

the measurement of ambient temperature, relative humidity and

light.

In addition to test data archiving and administration within the in-

strument, data exchange with PS3 software programs is also pos-

sible. Furthermore, your data can be backed up as an XML file,

which can be processed with an appropriate editor.

All of the values for electrical equipment required for approval re-

ports or device logbooks (e.g. per ZVEH) can be measured with

the test system.

Test data can be printed in standard test report forms by means

of an interconnected printer. The user can also create and print

out reports in PS3.

Use for Intended Purpose

•

The

test system

can be used as a benchtop instrument which must be iso-

lated and set up on a solid base while measurements are being performed. It

can also be hung around the neck with a carrying strap for use as a portable

device.

• Only those measurements which are described in the following

chapters may be performed with the test system.

•The test system, including the measuring probe, may only be

used within the specified measuring category (see section 2 on

page 10 as well as the table below explaining their meaning).

• Overload limits may not be exceeded. See technical data on

page 126 for overload values and overload limits.

• Measurements may only be performed under the specified

ambient conditions. See page 128 regarding operating tem-

perature range and relative humidity.

•The test system may only be used in accordance with the

specified protection type (see page 129).

Measuring Categories and their Meaning per IEC 61010-1

CAT Definition

Measurements in electrical circuits

which are not directly connected to the mains:

(e.g. electrical systems in motor vehicles and aircraft, batteries etc.

Measurements in electrical circuits

which are electrically connected to the low-voltage mains:

with plugs, e.g. at home, in the office or laboratory etc.

III

Measurements in building installations:

stationary consumers, distributor terminals, devices connected

permanently to the distributor

Measurements at power sources for low-voltage installations:

meters, mains terminals, primary overvoltage protection devices

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Metrawatt SECULIFE SB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info