590774
64
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
64 GMC-I Messtechnik GmbH
20 RS 232 Interface
Jack RS232 is provided for the connection of the following instruments:
(P)SI module (accessory),
which can be inserted into the lid of the tester
•PC
Barcode scanner of the following type:
B3261 with RS232 interface (article number: GTZ3261000R0001)
Z720A with RS232 interface (article number: Z720A)
or RFID scanner of the following type:
Z751G with RS232 interface (article number: Z751G)
20.1 Transmission of Measurement Results to the (P)SI module
Test results – except for results from individual measurements and the
function test – can be transmitted from the test instrument to the (P)SI
module, where they can be stored and printed out in the form of measur-
ing, test and statistics reports at any time.
20.2 PC Connection
Connection to an IBM compatible PC is also possible. The PC is
connected to the interface at the test instrument, or to the interface
port at a previously installed (P)SI module.
20.2.1Software Evaluation of Measurement Results
Convenient software programs such as PC.doc-WORD/EXCEL, PC.doc-
ACCESS or PS3 allow for easy preparation of measuring and test reports,
as well as archiving of measured data.
20.2.2Instrument Control via Interface Commands
All key functions included with the test instrument can be simulated
with the help of interface protocols, and the following parameters can be
queried:
Type of measurement and measuring range
Test setup
Measurement sequence progress
Detailed measuring results
20.3 Interface Definition and Protocol
The interface included with the test instrument is in compliance
with the RS 232 standard.
Technical Data:
Baud Rate 9600 baud, permanently set
Character Length 8 bits
Parity none
Stop Bits 1
Data Protocol per DIN 19244
X_ON / X_OFF protocol
Connector Pin Assignments, 9-Pin Subminiature Socket Connector:
Note
+
A detailed description of the interface protocole is available from
our Product Support, refer to chapter 24 for contact details.
1: External in + (for internal use only)
2: TXD (transmitter output)
3: RXD (receiver input)
4: External in +
5: GROUND
6: +5 V
(500 mA output, for barcode scanner only)
7: Ext. in –
8: Control output
9: +9 V (for (P)SI module only)
9
876
54
3
21
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gossen Metrawatt SECULIFE ST wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info