703122
20
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
EN 20
5. Place one of the perforated discs ( ne, medium, coarse)
in front of the cutter head. Make sure that the grooves
of the perforated disc t correctly in the recesses on the
mincing attachment.
6. Screw the locking nut (13) onto the mincing attachment.
Do not overtighten!
7. Place the storage bowl (4) onto the feed chute of the min-
cing attachment.
8. Place a bowl beneath the mincing attachment to capture
the chopped-up food.
9. To switch on the device, move the I / 0 / R button to the I
(On) position.
10. Place the food in the feed chute and push it through bit by
bit using the plunger (3).
11. To switch the device off again, move the I / 0 / R button to the 0 (Off) position.
12. Remove the mains plug from the plug socket after use.
13. Clean the device and the used accessories after each use (see „Cleaning and Storage“).
Use for Making Sausages
1. Place the motor unit (6) on an even, stable sur-
face.
2. Insert the mincing attachment (8), the screw
conveyor (9), the cutter head (10) and one per-
forated disc into the device in the manner de-
scribed in “Use for Chopping Up Meat and Fish”.
3. Place the sausage spout (11) onto the perforated disc and x it in place with the
locking nut (13). Do not overtighten!
4. Place the storage bowl (4) onto the feed chute of the mincing attachment.
5. Select a sausage casing (e.g. arti cial or natural gut) and stretch it over the sausage
spout.
6. To switch on the device, move the I / 0 / R button (7) to the I (On) position.
7. Place the food in the feed chute and push it through bit by bit using the plunger (3).
8. Allow the lled sausage casing to run off the sausage spout. Make sure that the
sausage casing is not over lled.
9. To switch the device off again, move the I / 0 / R button to the 0 (Off) position.
10. Finally twist the sausage casing to shape little individual sausages.
11. Remove the mains plug from the plug socket after use.
12. Clean the device and the used accessories after each use (see „Cleaning and Sto-
rage“).
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

gourmetmaxx-amg31b-100---08612

Suche zurücksetzen

  • der Fleischwolfaufsatz kann nicht so montiert werden wie beschrieben, der Gemüseaufsatz schon
    Eingereicht am 15-6-2020 13:44

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gourmetmaxx AMG31B-100 - 08612 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info