Bedienungsanleitung Gourmetmaxx HF-8801TS-S - 02675 (Seite 22 von 64) (Deutsch, Englisch, Holländisch, Französisch)

703219

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

EN 24

Before ﬁ rst use

• Remove all packaging material and any protective ﬁ lm used to secure it during trans-

port. Never remove the type plate or any warnings!

• Before enjoying the ﬁ rst food to be cooked, we recommend doing a test run to re-

move any residue left over from production: Let the device heat up for approx. 15

minutes at the highest temperature setting without anything inside (see “Operation

and preparation” chapter”). Make sure the room is well ventilated!

During initial startup, production-related additives (e.g. grease) can lead to slight

smoke and/or odour development. This is normal and not a defect of the device.

• Clean the device and all accessories thoroughly (see “Cleaning, Care and Storage”

chapter).

Set up and connect the device

NOTICE!

■ Never place the device on a soft surface. The ventilation slits on the bottom of the

device must not be covered. Otherwise it could overheat and become damaged.

■ Unwrap the connection cable fully before connecting the device.

■ Ensure that the connection cable is not crushed, kinked or laid over sharp edges, and

that it does not come into contact with hot surfaces (e.g. the device).

■ The power cord must not hang down from the installation surface, in order to prevent

the device from tearing down.

■ Only connect the device to properly installed sockets with earth contacts that match

the technical specs of the device. The socket must also be easily accessible after

connection, so that the network connection can be quickly disconnected.

■ The device has rubber feet. Some furniture is covered with material that could affect

the rubber feet. Place a pad underneath the device for safety purposes if necessary.

1. Place the device on a dry, level, solid and heat-resistant surface with a clearance of

at least 20 cm on all sides and at least 30 cm above.

2. Plug the power connector into a socket. A signal tone will sound and all elements on

the display will light up once. Then all elements will disappear until the 4 indicator

lights (23) come back on.

Safety equipment

• The device is equipped with an internal timer. After the time set on the timer has

elapsed, the heat supply will automatically switch off. To switch the device back on,

press the button (8) (see “Operation and preparation” chapter).

• The device automatically switches off when the drawer (4) with the basket insert (3)

is pulled out of the device. All elements will disappear from the touchscreen (10). If

the drawer is inserted back into the device, a signal tone will sound and all elements

will light up. The previously set programme and the previous time set on the timer will

continue (see the “Handling” and “Operation and preparation” chapters).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gourmetmaxx HF-8801TS-S - 02675 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info