Bedienungsanleitung GPO Westwood (Seite 8 von 60) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

674299

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation Instructions: Bluetooth Mode

To use you use your GPO Westwood speaker with Bluetooth

connection, please follow the instructions below:

• Connect the power cable to the speaker by inserting the jack plug

into the DC-IN port, and then connect the plug to a mains power

socket.

• Rotate the power dial clockwise until you hear a “click”, this will

turn the speaker on.

• The blue light underneath the Bluetooth function (BT) will light up

and begin to flash. This means that the unit is searching for another

Bluetooth device to pair with.

• Visit the Bluetooth app or setting on your device and ensure that it

is switched on. You may need to click “search for other devices”.

Please also make sure that your device is set to ‘discoverable’.

• Your speaker will appear as “GPO”, select this. Once you have a

successful connection between the speaker and your device

“GPO” will appear in the “my devices” or “paired devices” section

on you device and the blue flashing light on the speaker will

become solid.

• Visit your music app on your phone and press play. You will need to

control your music from your device. Please be aware that the

volume can be controlled on the speaker by the volume button and

on the volume controls on your device.

• When music is successfully playing through your Westwood

speaker the blue light will flash slowly. Turn the bass and treble

dials to achieve the sound you desire.

• To disconnect your device from the Bluetooth connection with your

speaker, simply turn the Bluetooth off on your phone, switch off the

speaker or press the function button if you choose to connect to

the speaker a different way.

• To turn your GPO Westwood off, rotate the power dial anti-clock-

wise until you hear a “click”. Disconnect the jack plug from the

DC-IN port, followed by the plug from the mains power source.

How To Connect Your GPO Record Player

To connect your GPO Westwood speaker to a GPO record player:

• Turn your GPO Westwood speaker on using the above

instructions.

• Using the aux cable provided, insert the red and white jacks into

the corresponding coloured plugs on the back of your GPO

record player. Then insert the 3.5mm jack on the other end of the

cable into the 3.5mm jack port underneath “AUX IN” on your

GPO Westwood speaker.

• Play music from your GPO record player as normal, the sound

will exit from your GPO Westwood speaker. You can control the

volume on your record player and your speaker. Turn the bass

and treble dials to achieve the sound that you require.

• To disconnect the speaker from your record player, ensure both

units are switched off correctly according to guidelines provided

by ProTelX (GPO manufacturers). Then disconnect all cables

from your speaker and record player.

GPO_Westwood_EU_Manual.indd 8 15/09/2016 15:45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

GPO Westwood Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info