670594
7
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
1312
Craft pitches/angles
forward or backward.
Adjust Pitch Trim.
Reset Button
Flying Tips & Features
Tips for Safe Operation
It is recommended to only fly in large, open spaces that are free of obstacles like
power lines, trees, ceiling fans, etc.
When flying indoors, avoid walls and ceilings, as the craft will be drawn towards them
if closer than 2-3 feet.
Stand behind the craft when first taking off, so that you and the craft are facing the
same “forward” direction. This will help with orientation when the craft is airborne.
Novice pilots should move the controls slowly and deliberately to get used to the
craft’s flying characteristics. Try using one control at a time.
Practice basic flight operations like take off, hovering, and landing.
If you get into trouble or if anything obstructs the rotors, cut power immediately and
safely clear the obstruction. Check for possible damage before flying again.
Speed Setting
Press the Speed button once to set the craft’s speed.
Low: Provides smooth and predictable control of the craft. The remote will chime once
to indicate the low speed setting.
Medium: The craft will move and respond faster to all control inputs. The remote will
chime twice to indicate the medium speed setting.
High: Highest setting for maximum performance. The remote will chime three times to
indicate the high speed setting.
Trim Adjustment
Gyroscope Recalibration
If the craft is experiencing difficulty flying or is
behaving erratically, it’s gyroscopes may need
to be recalibrated. Do not attempt to do this
while flying, safely land the craft first and place
it on a flat surface. The craft and the remote
should already be linked together.
Pull down and to the right on both controls
sticks for 2-3 seconds. The remote will chime
once and the LEDs on the craft will blink
rapidly. When the LEDs have stopped blinking
the recalibration is complete and the craft is
ready to fly.
Remote Trim Reset
If you are still having difficulty flying, it may
help to reset the trim controls on the remote.
Do not attempt to do this while flying, safely
land the craft first.
Press the Reset button, the remote will chime
once to indicate that the trim has been reset
to default.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für GPX DR397-1903 Sky Rider Drone-osaur Quadcopter wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info