Bedienungsanleitung Graef CM 95 (Seite 11 von 16) (Deutsch, Englisch)

506397

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Coffee Grinder CM 95

How to programm and

grind measurements

noTe

■ The factory default setting for

cup

is 12 seconds, and for

cups is 20

seconds.

■ To reset original factory default set-

tings, press and hold the program P

button for a period of 5 seconds. All

three buttons will ash once after 1

second - continue pressing the pro-

gram P button and all three buttons

will ash three times at 5 seconds. This

will indicate the factory default set-

tings have been restored.

■ Position the group handle with grind fun-

nel positioned on top into the group hand-

le locator.

■ Flip the switch to the ‘Auto’ position.

■ On the control panel, press and hold the

program P button for a period of 1 second

- all three buttons will ash once indicating

you have activated program mode. Remo-

ve your nger from the program P button.

The program P button will stay fully illumi-

nated, while the

button and but-

tons will soften in brightness.

noTe

The programming mode can be

aborted at any stage by pressing the

program P button again.

 Select either the

cup or but-

ton to program the grind time for that

selected button. The selected button

will begin to ash, and the motor will

become activated. Ground coffee will

begin to deliver into the group handle.

 To stop the coffee grind and set your

programmed

or grind meas-

urement, re-select the

button that was previously selected

(this is indicated by the ashing but-

ton). The motor will be de-activated,

and the time of the selected

function will be stored.

noTe

Allowable program time for

and

uttons is 2 sec – 40 sec..

Cleaning

Old coffee remains in the unit can lead to

oxidation. That spoils the beverage; it can

cause an unpleasant, rancid taste. The units

should always be in optimum condition to

be able to provide optimum espresso at any

time.

imporTanT!

■ Spots and marks on the surface of the

burrs are part of the hardening pro-

cess. These marks do not affect the

performance of the grinder or the tas-

te of the coffee.

■ Ensure the unit is switched off and un-

plugged from the power outlet.

■ Clean the exterior of the unit with a soft,

moist cloth. If heavily soiled, a mild deter-

gent can be used.

■ Take off the coffee bean container. Press it

down and turn counter clockwise.

■ Take out the unused beans and put them

in an airtight container so they stay fresh.

■ Clean the coffee bean container and the

coffee container with warm water and a

little detergent.

■ After that, dry both receptacles well.

Cleaning the burrs

If the coffee grinder is used frequently (eve-

ry day), the burrs need to be cleaned every

three weeks to ensure best performance of

the coffee grinder. Regular cleaning helps

the burrs achieve consistent grinding re-

sults, which is especially important when

grinding coffee for espresso

■ Remove the coffee bean container as de-

scribed in “Cleaning”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graef CM 95 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info