Bedienungsanleitung Gram KS 2400 (Seite 35 von 47) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

460691

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

to alternating current. The connection

values for voltage (V) and frequency (Hz)

are given on the nameplate in the cabinet

. Power must be connected via a wall

socket with a switch. The wall socket sho-

uld be easily accessible.

All earthing requirements stipulated by the

local electricity authorities must be observ-

ed. The refrigerator plug and wall socket

should then give the correct earthing. If in

doubt, contact your supplier or authorised

electrician.

WARNING

The flexible cord (mains lead) fitted to this

appliance has three cores for use with a 3-

pin 13-Amp or 3-pin 15-Amp plug. If a B.S.

1363 (13-Amp) fused plug is used, it

should be fitted with a 13-Amp fuse.

IMPORTANT

The wires in this mains lead are coloured

in accordance with the following code:

GREEN-AND-YELLOW: EARTH

BLUE: NEUTRAL

BROWN: LIVE

The colours of the wires in the mains lead

of this appliance might not correspond with

the colour markings identifying the termi-

nals in your plug.

Proceed as follows:

Connect the GREEN-AND-YELLOW wire

to the plug terminal marked “E” or an earth

symbol, or coloured GREEN, or

GREEN-AND-YELLOW. Connect the

BLUE wire to the plug terminal marked “N”

or coloured BLACK.

Connect the BROWN wire to the plug ter-

minal marked “L” or coloured RED.

Illustration shows how easy it is to

change the door from right-hinged to left-

hinged - or vice versa.

Lay the refrigerator on its back, front

uppermost. First, using a 2.5 mm hexagon

key, remove the handle . Remove the

front legs using an 8 mm hexagon key.

This also releases the lower hinge.

Transfer top and bottom hinges to the

opposite side.

Bottom hinge:

Using a 13 mm open-ended spanner and a

2 mm hexagon key, move hinge pin and

grubscrew to opposite hand.

Top hinge:

Move hinge pin to opposite side. Note

that the pin must be mounted opposite

hand when it is moved to the opposite

side, i.e. it must be turned 1/4 turn.

It might be necessary to use pliers when

pulling the hinge pin free from the top.

Move the cover plug on the top of the door

to the opposite side.

When the door has been mounted, a 9 mm

filler (wood or something similar) should be

used at the bottom hinge. Place it between

the cabinet front and the door edge to pro-

vide suitable clearance for the sealing

strip.

Remember to place the correct number of

washers beneath the bottom hinge to en-

sure that the door has the correct height.

Fit the hinge under the leg.

When the door has been adjusted, screw

the leg in firmly and lock the hinge by

tightening the grubscrew against the cabi-

net.

Refit the door handle.

If during transport the refrigerator has

been laid down, or if it has been stored in

cold surroundings (colder than +5°C) it

must be allowed to stabilise for at least 1

hour before being switched on.

You can change the

door from right-hinged

to left-hinged or vice

versa yourself

Starting up

Type 76-004-1260 09/09/04 10:48 Side 35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gram KS 2400 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info