Bedienungsanleitung Grandhall E Grill (Seite 6 von 39) (Deutsch, Englisch, Holländisch, Französisch)

590861

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

6N.

C L E A N I N G A N D M A I N T E N A N C E

NOTE: To aid cleaning, the inside of the grill may be lined with

aluminium foil.

Remove the cooking plate/s and reflectors (See: CLEANING

THE REFLECTORS). Cut a piece of aluminium foil

340 x 425 mm

and slide in under the heating elements. Push down to take the

form of the bottom of the grill. With your finger, push a hole into the

foil at the grease drain hole position to allow grease to flow into

the grease receptacle.

Remove the cooking plate and reflectors. Wipe the inside of the

grill clean with hot soapy water and a soft cloth. Be careful not to

damage the elements.

Dry with a clean cloth. To ensure completely dry, switch the grill

on with the hood down for 4 - 5 minutes.

CLEANING THE INSIDE OF THE GRILL

After each use remove the heat reflectors and wash throughly to remove

all fat and food residues - an ‘oven cleaner’ may be used to remove

stubborn residues.

CLEANING THE REFLECTORS

CLEANING THE GREASE RECEPTACLE

Proper care and maintenance will keep your grill in top operating condi-

tion and prolong its life. Follow these cleaning procedures on a timely

basis and your grill will stay clean and operate with minimum effort.

CAUTION: Be sure your grill is OFF, unplugged, and cool before

cleaning.

NOTE: Reflectors must be removed before cleaning.

Do not use abrasive cleaners which can dull the surface.

Keeping the reflectors surface clean and bright will maintain the

cooking efficiency.

To remove the reflectors, first remove the cooking plate, then slide

the reflectors out - one from the front, one from the rear.

CLEANING THE GRILL PLATE & HOT PLATE

Before initial use and periodically after, wash the grill plate and hot plate

in a mild soap and warm water solution. You can use a wash cloth or

vegetable brush to clean your grill plate and hot plate. Dry each thor-

oughly before reinstalling back in the grill.

To reduce the chance of fire, the grease receptacle must be visually

inspected before each grill use. Remove the grease receptacle from the

grill. Remove any grease and wash the grease receptacle with a mild

soap and warm water solution. Dry the receptacle thoroughly before

reinstalling.

Grease can build up on the inside of the lid. Visually inspect the inside of

the grill lid before each grill use. Unplug the unit and use a wet wash-

cloth to remove any grease. Leave the lid open and let the grill dry before

using it again.

CLEANING THE INSIDE OF THE GRILL LID

CLEANING EXTERIOR PAINTED SURFACES

Before initial use and periodically thereafter, we suggest you spot clean

your grill’s exterior using a mild soap and warm water solution. (Do not

immerse the grill or cord in water.) You can use a wash cloth or sponge

for this process. Do not use a stiff wire or brass brush. These will scratch

stainless steel and chip painted surfaces during the cleaning process.

Unplug the unit (grill must be completely cool) before cleaning exterior

surfaces. Let the unit completely dry before cooking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grandhall E Grill Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info