Bedienungsanleitung Grandhall Heatstrip (Seite 14 von 95) (Deutsch, Englisch, Holländisch, Französisch)

590867

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

R A D I A N T O U T D O O R H E A T E R S

VIEW FROM TOP

VIEW FROM UNDERNEATH

Flush mount enclosure

The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP

Design into a ceiling. They are

available for all HEATSTRIP

Design models, and are supplied as a one-piece unit for mounting of heaters. Flush

mounting can be used with plaster or wood lined or concrete ceiling materials.

An ideal mounting height is 2.5m-2.7m, with a maximum ceiling height of 3.0m in an outdoor enclosed environment.

Maximum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.

The facia of the enclosure is manufactured from 316 Stainless Steel and the rear casing is black zinc coated steel.

Please refer to the Installation Manual for more detailed installation information.

Safety

Do not allow any cables, furnishings, flammable materials or other items come in contact with any surface of the Flush

Mount Enclosure.

The Flush Mount Enclosure needs to be installed as per the installation instructions paying special attention to the

minimum clearances. The heater needs to be mounted on a rigid bracket or fixing.

Maintenance Flush Mount Enclosure

The Flush Mount Enclosure is made from durable materials, however regular care and maintenance of your product

will help prolong its life.

It is recommended that you wipe down your Flush Mount Enclosure and with a soft cloth gently wipe the surfaces of

the Flush Mount Enclosure with a mild detergent to remove the built up contaminants from the environment. Then with

a clean cloth ensure all detergent is removed.

All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the Flush Mount

Enclosure. In this case, additional cleaning and maintenance may be required. The cleaning process at least every

three months will reduce the amount of build up and keep it looking as best it can. If the Flush Mount Enclosure is in a

corrosive environment eg. salt spray, we recommend that you clean the Flush Mount Enclosure every week.

Before cleanings or inspection activity, the heater must be switched off and cooled down completely.

Do not use any abrasive materials or products to clean the Flush Mount Enclosure, this includes solvents, citrus

based cleaners or other harsh cleaning products.

When handling the Flush Mount Enclosure, ensure that your hands are clean or that you use clean gloves as grease

or dirt can mark the surface of the heater.

Do not use high pressure water to clean Flush Mount Enclosure. It is not recommended to hose down the Flush

Mount Enclosure and heater as water may get into the roof cavity.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grandhall Heatstrip Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info