Bedienungsanleitung Grandstream GXP-1200 (Seite 21 von 44) (Englisch)

470664

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Grandstream Networks, Inc. GXP User Manual Page 21 of 44

Firmware 1.2.5.3 Last Updated: 03/2011

1. Blind Transfer: Press “TRANSFER (or TRNF for GXP-2000)” button, then dial the number and

press the “SEND” button to complete transfer of active call.

2. Attended (or Supervised) Transfer: Press “LINEx” button to make a call and automatically place

the ACTIVE LINE on HOLD. Once the second call is established, press “TRANSFER (or TRNF)”

key then the LINE button of the waiting line to transfer the call. Hang up the phone call after

“Transfer Successful” is displayed in the screen.

3. Semi-Attended Transfer: In the web UI, under “Account Settings”, select the Semi-attended

Transfer Mode. There are two modes to select for this feature. RFC5589 and Send Refer with early

dialog:

a. With RFC5589 phone will not send out REFER to transferee until 200OK is received from

transfer target. Like an attended transfer, press “LINEx” button to make a call and

automatically place the ACTIVE LINE on HOLD. Dial the second call, and as it is ringing

press the “TRANSFER (or TRNF)” key and then the blinking LINE button of the call on hold

to transfer the call.

b. With "Send REFER with early dialog" mode phone will send out REFER as soon as the

transfer target is selected (in the early dialog stage). Like an attended transfer, press “LINEx”

button to make a call and automatically place the ACTIVE LINE on HOLD. Dial the second

call, and as it is ringing press the “TRANSFER (or TRNF)” key and then the blinking LINE

button of the call on hold to transfer the call. Transferor will hang up.

4. Auto-Attended Transfer (only on GXP1200): In the web UI, under “Advanced Settings”, set “Auto-

attended Transfer” to “Yes”.

 Establish a call between two phones

 Press TRANSFER button on GXP1200

 Select another line on GXP1200, call another phone and press SEND button

 If the remote phone answers, press TRANSFER button on GXP1200 to transfer the call

NOTE: If there is no extra line available, GXP1200 will do the transfer as if Auto-attended

transfer is disabled.

5-Way Conferencing

GXP can host conference calls and supports up to 5-way conference calling.

2. Initiate a Conference Call

 Establish a connection with two or more parties

 Press CONF button

 Choose the desired line to join the conference by pressing the corresponding LINE button.

 Repeat previous two steps for all other parties that would like to join the conference. This

can be done at any time. However, if a new call comes in, the other calls will be placed on

hold and the host will have to individually re-join the held lines back into the conference by

repeating the previous two steps again.

3. Cancel Conference: Canceling establishing conference call.

 If after pressing the “CONF” button, a user decides not to conference anyone, press CONF

again or the original LINE button.

 This will resume two-way conversation.

4. End Conference:

 Press HOLD to end the conference call and put all parties on hold;

 To speak with an individual party, select the corresponding blinking LINE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grandstream GXP-1200 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grandstream GXP-1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info