Bedienungsanleitung Grandstream GXP1450 (Seite 15 von 39) (Englisch)

470668

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

GXP1450 User Manual Page 14 of 38

Firmware 1.0.1.66 Last Updated: 05/2011

2. Attended Transfer: Press “LINEx” button to make a call and automatically place the ACTIVE LINE

on HOLD. Once the call is established, press “TRANSFER” key then the LINE button of the waiting

line to transfer the call. Hang up the phone call after “Transfer Successful” is displayed in the screen.

NOTE: To transfer calls across SIP domains, SIP service providers must support transfer across SIP

domains. Blind transfer will usually use the primary account SIP profile.

3-Way Conferencing

GXP1450 can host conference calls and supports up to 3-way conference calling.

1. Initiate a Conference Call

 Establish a connection with two parties

 Press CONF button

 Choose the desired line to join the conference by pressing the corresponding LINE button

 Repeat previous two steps for all other parties that would like to join the conference. This

can be done at any time. However, if a new call comes in, the other calls will be placed on

hold and the host will have to individually re-join the held lines back into the conference by

repeating the previous two steps again

2. Cancel Conference: Canceling establishing conference call

 If after pressing the “CONF” button, a user decides not to conference anyone, press CONF

again or the original LINE button

 This will resume two-way conversation

3. End Conference:

 Press HOLD to end the conference call and put all parties on hold

 To speak with an individual party, select the corresponding blinking LINE

NOTE: The party that starts the conference call has to remain in the conference for its entire duration, you

can put the party on mute but it must remain in the conversation. Also, this is not applicable when the feature

“Transfer on call hangup” is turned on.

Voice Messages (Message Waiting Indicator)

A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Press the MSG button to

retrieve the message. An IVR will prompt the user through the process of message retrieval. Press a specific

LINE to retrieve messages for a specific line account.

NOTE:

• Each line has a separate voicemail account. Each account requires a voicemail portal number to be

configured in the “voicemail user id” field.

• To check which line account has a message 1) press the message button (this always checks the

primary account), 2) check each line for stutter tone or 3) check missed calls using the menu.

Shared Call Appearance (SCA)

The GXP1450 phone supports shared call appearance by Broadsoft standard. This feature allows members

of the SCA group to shared SIP lines and provides status monitoring (idle, active, progressing, hold) of the

shared line. When there is an incoming call designated for the SCA group, all of the members of the group

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grandstream GXP1450 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info