Bedienungsanleitung Grandstream GXP21xx series (Seite 21 von 49) (Englisch)

470669

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

Grandstream Networks, Inc. GXP21xx User Manual Page 20 of 48

Firmware version: 1.0.1.110 Last Updated: 01/2012

 When using Easy Conference mode, press SEND button to establish the second call after entering

the number instead of using “#”.

 For the 4-way and 5-way traditional conference call, PCMU and PCMA are supported for the codec

being used in the conference.

Voice Messages (Message Waiting Indicator)

A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Press the Message button to

retrieve the message. An IVR will prompt the user through the process of message retrieval. Press a specific

LINE to retrieve messages for a specific line account.

NOTE:

 Each line has a separate voicemail account. Each account requires a voicemail portal number to be

configured in the “Voicemail User ID” field.

 To check which line account has a message 1) press the message button (this always checks the

primary account), 2) check each line for stutter tone or 3) check missed calls using the menu.

Busy Lamp Field

The Multi Purpose Key buttons can be configured for Busy Lamp Field function with a specified account.

When BLF is configured on one of the multi-functional buttons, the Speed Dial function will work when that

line is not in use. Call Pick Up is supported when user presses a flashing BLF key.

Shared Call Appearance (SCA)

The GXP21xx phone supports shared call appearance by Broadsoft standard. This feature allows members

of the SCA group to shared SIP lines and provides status monitoring (idle, active, progressing, hold) of the

shared line. When there is an incoming call designated for the SCA group, all of the members of the group

will be notified of an incoming call and will be able to answer the call from the phone with the SCA extension

registered.

All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the

line and places an outgoing call, and all the users of this group will not be able to seize the line until the line

goes back to an idle state or when the call is placed on hold. (With the exception of when multiple call

appearances are enabled on the server side).

In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a member

of the group places the call on public hold, the other users of the SCA group will be notified of this by the red-

flashing button and they will be able to resume the call from their phone by pressing the line button. However,

if this call is placed on private-hold, no other member of the SCA group will be able to resume that call.

To enable shared call appearance, the user would need to register the shared line account on one of the

accounts on the phone. In addition, they would need to navigate to “Settings”->”Basic Settings” on the web

UI and set the line to “Shared Line” with the corresponding account. If the user requires more shared call

appearances, the user can configure multiple line buttons to be “shared line” buttons associated with the

account.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grandstream GXP21xx series Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info