470669
33
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
Grandstream Networks, Inc. GXP21xx User Manual Page 32 of 48
Firmware version: 1.0.1.110 Last Updated: 01/2012
HTTP/HTTPS
Password
The password for the HTTP/HTTPS server.
Upgrade Via
This field allows the user to choose the firmware upgrade/config server path method:
TFTP, HTTP or HTTPS.
TFTP:
GXP21xx retrieves the new firmware files or new configuration file from the specified
TFTP server path at boot time. If there is no new firmware file or configuration file, the
system will start the boot process using the existing firmware or config file. If a TFTP
server is configured and new firmware files are retrieved, the new downloaded image
is saved into the Flash memory. (Please do NOT interrupt the TFTP upgrade process
(especially the power supply) as this will damage the device.
HTTP:
GXP21xx retrieves the new firmware files or new configuration file from the specified
URL or IP for the HTTP server. For example:
provisioning.mycompany.com:6688/Grandstream/1.0.0.6
Note: “:6688” is the specific TCP port where the HTTP server is listening; Omit if
using default port 80.
HTTPS:
GXP21xx retrieves the new firmware files or new configuration file from the specified
URL or IP for the HTTP server via a secured HTTP connection. For example:
provisioning.mycompany.com
Note: HTTPS default port is 443.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
For example:
firmware.mycompany.com:6688/Grandstream/1.0.0.6
Config Server Path
Defines the server path for provisioning; it can be different from the firmware server.
For example:
provisioning.mycompany.com:6688/Grandstream/gxp2120
Firmware File
Prefix/Postfix
Default is blank. If configured, GXP21xx will request the firmware file with the
prefix/postfix and only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone.
Note: This setting is useful for ITSPs. End user should keep it blank.
Config File
Prefix/Postfix
Default is blank. If configured, GXP21xx will request the config file with the
prefix/postfix and only the file with the matching encrypted prefix will be downloaded
and flashed into the phone.
Note: This setting is useful for ITSPs. End user should keep it blank.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grandstream GXP21xx series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info