Bedienungsanleitung Grandstream GXV-3000 (Seite 36 von 54) (Englisch)

67329

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Grandstream Networks, Inc. GXV-3000 User Manual Page 34 of 54

Firmware 1.1.3.50 Updated: 04/2009

Dial Plan Dial Plan Rules:

1. Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d

2. Grammar: x - any digit from 0-9;

• xx+ - at least 2 digits number;

• xx. – at least 1 digit number.

• ^ - exclude;

• [3-5] - any digit of 3, 4, or 5;

• [147] - any digit 1, 4, or 7;

• <2=011> - replace digit 2 with 011 when dialing

• | - or

• Example 1: {[369]11 | 1617xxxxxxx} – Allow 311, 611, 911, and any 11 digit

numbers with leading digits 1617

Example 2: {^1900x+ | <=1617>xxxxxxx} – Block any number of leading digits

1900 and add prefix 1617 for any dialed 7 digit numbers

• Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} –Allow any combinations of numbers with 11

digits which has a leading digit 1, but 5th digit cannot be 0 or 1. Or any length of num-

bers with a minimum of 2 digits beginning with 2, with the leading digit replaced with 011.

3. Default: Outgoing - {x+|*x+}

Example of a simple dial plan used in a Home/Office in the US:

{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }

Explanation of example rule (reading from left to right):

• ^1900x. - prevents dialing any number started with 1900

• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing

7 numbers and 1617 area code will be added automatically

• 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits

length

• 011[2-9]x. - allows international calls starting with 011

• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911

Note: In some cases user wishes to dial strings such as *123 to activate voice mail or

other application provided by service provider. In this case * should be predefined

inside dial plan feature and the Dial Plan should be: { *x+ }.

Delayed Call Forward

Wait Time

Time waited before the call is forward to a number or VM.

Default is 20 seconds.

Enable Call Features Default is Yes. If set to "No", then Call Transfer, Call Forwarding & Do Not Disturb will be

supported locally provided that the SIP server/proxy supports these features.

Session Expiration

The SIP Session Timer extension enables SIP sessions to be periodically “refreshed” via a

SIP request (UPDATE, or re-INVITE). Once the session interval expires, if there is no

refresh via a UPDATE or re-INVITE message, the session is terminated.

Session Expiration is the time (in seconds) where the session is considered timed out, pro-

vided no successful session refresh transaction occurs beforehand.

The default value is 180 seconds.

Min-SE

The minimum session expiration (in seconds). The default value is 90 seconds.

Caller Request Timer

If set to “Yes”, the phone will use session timer when it makes outbound calls if remote

party supports session timer.

Callee Request Timer

If selecting “Yes”, the phone will use session timer when it receives inbound calls with ses-

sion timer request.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grandstream GXV-3000 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info