505354
43
Zoom out
Zoom in
Vorherige Seite
1/138
Nächste Seite
FIRMWARE VERSION 1.0.1.38 GXV3175V2 USER MANUAL Page 43 of 138
Subnet Mask
This field shows the subnet mask of the GXV-3175.
Default Gateway
This field shows the Gateway of the GXV-3175.
DNS Server
This field shows the DNS Server of the GXV-3175.
NAT Type
This field shows the type of NAT configured.
Status/System Info
Product Model
Defines the product model: GXV3175.
Hardware Revision
Hardware version number: Main Board, Interface Board.
Part Number
This field contains the product part number.
Program Version
Program: This is the main firmware release number, which is always used
for identifying the software (or firmware) system of the phone.
System Up Time
This field shows system up time since the last reboot.
ADVANCED SETTINGS PAGE DEFINITIONS
Advanced Settings/General Settings
Local RTP Port
This parameter defines the local RTP-RTCP port pair used to listen and
transmit. It is the base RTP port for channel 0. When configured, for audio,
channel 0 will use this port _value for RTP and the port_value+1 for its
RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its
RTCP. For video, channel 0 will use port_value+2 for RTP and port_value+3
for its RTCP; channel 1 will use port_value+6 for RTP and port_value+7 for
RTCP. The default value is 5004.
Use Random Port
When set to Yes, this parameter will force random generation of both the
local SIP and RTP ports. This is usually necessary when multiple
GXV-3175s are behind the same full cone NAT. The Default setting is Yes.
(This parameter must be set to No before Direct IP Calling will work)
Disable PC Port
Default is No. If set to “Yes”, PC port will be disabled.
Disable in-call DTMF
display
Default is No. If set to “Yes”, DTMF digits entered during a call will not be
displayed on LCD.
Keep-alive Intervals (s)
This parameter specifies how often the GXV3175sends a blank UDP packet
to the SIP server in order to keep the “ping hole” on the NAT router to open.
The default setting is 20 seconds.
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grandstream GXV3175v2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info