505354
49
Zoom out
Zoom in
Vorherige Seite
1/138
Nächste Seite
FIRMWARE VERSION 1.0.1.38 GXV3175V2 USER MANUAL Page 49 of 138
HTTP/HTTPS Password
The password for XML configuration file download.
Upgrade Via
This field allows the user to choose the firmware upgrade method: TFTP,
HTTP or HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Config Server Path
This is the server path for provisioning; it can be different from the firmware
server.
Firmware File Prefix
This field enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted prefix will be downloaded and flashed
into the phone.
Firmware File Postfix
This field enables your ITSP to lock firmware updates. If configured, only the
firmware with the matching encrypted postfix will be downloaded and
flashed into the phone.
Cust Firmware Prefix
Prefix for GUI customization file.
Cust Firmware Postfix
Postfix for GUI customization file.
Config File Prefix
This field enables your ITSP to lock configuration updates. If configured,
only the configuration file with the matching encrypted prefix will be
downloaded and flashed into the phone.
Config File Postfix
This field enables your ITSP to lock configuration updates. If configured,
only the configuration file with the matching encrypted postfix will be
downloaded and flashed into the phone.
DHCP Option 66 override
Server
The Default setting is Yes. If DHCP option 66 is enabled on the LAN side,
the TFTP server can be redirected. Please be very careful when configuring
this as the redirection could break the phone if this happens during the
firmware upgrade.
DHCP Option 120
Override SIP Server
Default is Yes”. This allows device gets provisioned from the server
automatically.
PnP (3CX) Auto Provision
Default is “No”. Plug-n-Play auto provision. Verified working fine with 3CX.
Automatic Upgrade
The default value is No. Choose Yesto enable automatic HTTP upgrade
and provisioning.
Automatic Upgrade Check
Interval (m)
Specifies the time period to check for firmware upgrade. The default setting
is 10080 minutes ( 7 days)
Hour of the day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grandstream GXV3175v2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info