505354
54
Zoom out
Zoom in
Vorherige Seite
1/138
Nächste Seite
FIRMWARE VERSION 1.0.1.38 GXV3175V2 USER MANUAL Page 54 of 138
SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS
The GXV3175 has three lines that can be configured to accommodate independent SIP accounts. Every
SIP account has an individual configuration page.
Account/General Settings
Account Active
Select Yes to enable and use the Line.
Account Name
The account name for the user that is displayed on the LCD screen.
SIP Server
The IP address of the SIP server or the given domain name of the VoIP
service provider.
SIP User ID
User account information provided by the VoIP service provider; normally
similar to a telephone number or an actual telephone number.
Authenticate ID
The authenticate ID for the SIP user. It can differ or be the same as the SIP
user ID.
Authenticate password
The password that the GXV uses to authenticate with the ITSP (SIP) server.
After it is saved, this will appear as blank for security reasons. The
maximum length is 25 characters.
Voice Mail User ID
When this is configured, the user can dial to the voicemail server using the
MESSAGE button. This ID is normally the feature code for Voice Mail.
Name
The Caller ID that will be displayed for the account.
Tel URI
The default setting is Disable. If the Video phone has an assigned PSTN
number, this field should be set to Enable”. If User=Phone” is set, a
User=Phone” parameter will be attached to the “From header” in the SIP
request to indicate the E.164 number.
Account/Network Settings
Outbound Proxy
IP address or Domain name of the Outbound Proxy, or Media Gateway, or
Session Border Controller. Used by the GXV3175 for firewall or NAT
penetration in different network environments. If a symmetric NAT is
detected, STUN will not work and ONLY an Outbound Proxy will work.
Secondary Outbound
Proxy
IP address or domain name of a backup Outbound Proxy.
DNS Mode
The default is set to A Record. If the user wishes to locate the server by DNS
SRV, the user may select SRV or NATPTR/SRV.
NAT Traversal
This setting decides whether the NAT traversal mechanism is activated. If it
is set to “STUN” and STUN server is configured, the GXV3175 will route
according the STUN server. In this mode, the STUN client embedded in the
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grandstream GXV3175v2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info