Cursor of
the current
day of the
week flashes
Ho = Holiday
Image I
If the holiday program is to start on a different day
to the current one – max. 6 days ahead – use the
"Day" key to select the day on which the holiday
program is to commence.
If the holiday program is to be executed for up to
max. 99 days, continue with steps
+
.
If the holiday program is to be executed for an
unlimited period, leave out step
and continue
with step
.
Enter the required number of holiday days with
the "Sel." key (1 to max. 99).
Press the " " key to save the entries.
If the current day of the week was entered as the
holiday program start, the following appears:
d = day
number of
entered
holiday days
Image II
Image II remains until the holiday days have passed,
for example d:10, d:09, d:08 .......... etc.
Pressing the " " key again and holding it down now
allows the day of the week, the time and the cur
rent
switching state – " " = ON or " " = OFF –
to be checked.
If a day of the week other than the current day was
entered as the holiday program start, the current time
is displayed after the " " key is pressed. The holiday
program is then started at midnight at the start of the
selected day of the week and its duration is displayed
(Figure II).
After the programmed holiday days have expired,
the current time appears in the display.
Aborting the holiday program prematurely
If the holiday pr
ogram has already started:
● Press the " " key once
If the holiday pr
ogram has not yet started:
● Press the " " key twice
3. Technical data
Connection see unit stamp
Switching capacity see unit stamp
Ambient temperature –10 °C to +55°C
Running reserve see unit stamp
Memory locations 42
Shortest switching time 1 minute
Programmable every minute
2.3 Reading the programmed switching times
Press the "Prog." key several times:
– displays all entered switching times starting
with the first memory location.
– the first free memory location
"– – : – –" is then displayed.
– the number of memory locations still free is then
displayed.
If the memory locations are occupied, the following
appears in the display: "FR "
Press the " " key:
The time switch changes to automatic mode and
displays the current time.
Automatic Mode Manual Mode
Continuous Operation
= ON
= OFF
= OFF
= ON
= Continuous ON
= Continuous OFF
The switching If the current The output will
times correspond switching state is remain fixed ON
to the entered changed manually, , or fixed OFF
program. the next switching as selected
command is indefinitely
until the
again executed " " key is used
automatically to restore the timed
according to the function.
entered switching
program
Entering switching times as described under
1.4
The " " key must be pressed for each switching time.
Next, save the holiday switching times with the
"Prog." or " " key.
Entering the start and duration
of the holiday program
After entering the switching times for the
holiday program
Press the " " key once. the following image
appears:
2.7 Holiday program
Note:
The holiday program has priority over the standard
week program. The holiday program can only be
entered if all seven days of the week (1234567)
are selected.
2.4 Changing the programmed switching times
Keep pressing the "Prog." key until the switching
time to be changed is displayed.
The new data can then be entered as described in
Point 1.4.
Note on saving switching times:
If programming is not
completed with the " " key
after the switching time is entered (1.4), the
complete switching command is still automatically
saved after approximately 90 seconds. The time
switch then changes to automatic mode and shows
the current time again.
2.5 Deleting individual switching times
Keep pressing the "Prog." key until the switching
time to be deleted is displayed.
Set to "– –" with the "h" or "m" key and keep
the " " key pressed for about 3 seconds.
The switching time is deleted and the current time is
displayed after the key is released.
2.6 AM/PM time display
If the "±1" key and the "h" key are pressed
simultaneously, the time display is switched to AM/PM
mode (used mainly in English-speaking countries).
2. Additional functions
2.1 Summer time and winter time setting
● Press the "±1h" key once.
2.2 Manual switch " "
The current switching state can be changed at any
time with the " " key for channel 1 or 2 (depending
on the version). Use of this manual override facility
does not alter any of the programmed information.
