Bedienungsanleitung Graupner MC 22S (Seite 135 von 180) (Englisch)

467112

135

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

135

Programming examples – Fixed-wing models

The model settings you programmed before you as-

signed the phase switch are now to be found in the

ﬂ ight phase «1 Normal». That is the phase which is

called up when the switch is at the centre position.

3rd step

You have already programmed all the settings for your

model in the primary ﬂ ight phase, and you can avo-

id having to enter all the data again in the “new” ﬂ ight

phases (although you could do that, if you really wan-

ted to) by copying the programmed settings – which

you know from test-ﬂ ying to be correct – from the

«Normal» ﬂ ight phase into the other two phases.

This is carried out in the menu ...

»Copy / Erase« (page 47)

Select the menu point “Copy ﬂ ight phase” with the ro-

tary control pressed in, then press ENTER or give a

brief press on the rotary control.

A window now appears entitled “Copy from phase”; in

it select “1 Normal” ...

C o p y f r o m p h a s e :

1 N

o r m a l 2 T h e r m a l

3 S p e e d 4

… and then press ENTER again; the screen re-

sponds by switching to “Copy to phase”. Select the

destination (initially “2 Thermal”), and conﬁ rm by

pressing ENTER again. Conﬁ rm your selection in the

security query which subsequently appears, then wait

while all the settings as deﬁ ned in your programming

are copied to the second phase.

Use the same procedure to copy the data to the third

phase (normal  speed).

4th step

At this point all three phases are programmed and all

the settings are copied; a “smooth” transition has also

been programmed, but ... there are no settings which

are speciﬁ c to the different ﬂ ight phases, i.e. all the

phase settings are the same.

To program these settings, call up the menu ...

»Wing mixers« (page 84)

A il e r o n d if f e r e n c e + 0 %

F la p d iffe r e n c e + 0 %

A il e r o n s 2 > 4 R u d d e r + 0 %

A il e r o n s 2 > 7 F l a p s +

0 %

B r a k e > 3 E le v a t o r + 0 %

« N o r m a l »

S E L

… and you will see the name of the current ﬂ ight

phase at the bottom edge of the screen. If you now

change the position of the phase switch, the name of

the new ﬂ ight phase assigned to that switch position

appears, but the settings are still those copied from

the «Normal» ﬂ ight phase. At this point you can make

the changes as required by the new ﬂ ight phase –

which will vary according to the phase you have se-

lected by the switch position.

Note:

The displayed list of mixers varies according to the

model type you have selected.

Once you have programmed all the settings, you

will be able to switch to and fro between the various

ﬂ ight phases. However, when you operate the switch

you will soon realise that nothing has changed in the

basic settings of the control surfaces!

5th step

At this stage we have to make adjustments to meet

the differing requirements of the individual ﬂ ight pha-

ses. This is carried out in the menu ...

»Control adjust« (page 58)

FREE

#NTR

#NTR

Move to the “Offset” column and modify the settings

for (say) the ailerons and camber-changing ﬂ aps in-

sofar as they differ from the «Normal» ﬂ ight phase.

Note these points: “Offset control 5” affects the aile-

rons, “Offset control 6” applies to the ﬂ aps. You can

change the travels in either the positive or negative

direction. Any elevator trim change required is made

using the option “Flaps 6  3 elevator” in the »Wing

mixers« menu. These adjustments have to be carried

out separately for each ﬂ ight phase.

E r a s e m o d e l = >

C o p y m o d e l

m o d e l = >

C o p y M C 2 2

e x t e r n a l = >

C o p y e x t e r n a l

M C 2 2 = >

C o p y f lig h t p h a s e = >

S e c u r e a ll m o d e ls

P C = >

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MC 22S Seite 135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info