747993
26
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
26 / 80 33028_mc_28_Teil2_jh
Motor on CH1
If you have selected airplane in the model selection, the line "Motor
at CH1" will appear. The settings here are previously described.
Tail
Select the tail type of your model to obtain the related control sig-
nals at the receiver outputs (see "Receiver assignation" menu).
"Normal"
The elevator and rudder are controlled each by only one servo.
"V tail"
The elevator and rudder are controlled by two separately-articulated
rudders arranged in a V-shape. The coupling function for the rudder
and elevator control is automatically transferred from the program.
The influence of the rudder on the elevator component can be set
in the "Dual Rate / Expo" menu. The servo travels can be adjusted
one to the other in the "Servo setting" menu. If the rudder travel has
to be differentiated, select here the tail type "normal" and set the V
tail in the "Cross mixer" menu.
"Delta"
This option must be selected for delta wing models. In case of selec-
tion of "2 AILE" in the line "Ailerons/Flaps", see following. The aileron
and elevator control is actuated respectively by one servo for each
half-wing. If you select "2/4AILE 2/4FLAP" the aileron and elevator
control depends on the settings in the "Multi-flap menu" sub-menu
of the "Wing mix" menu.
"2 ELE Sv 3+8"
This option is for models with two elevator servos. When the eleva-
tor control is actuated, the servo connected to the output 8 works
in parallel with servo 3. The elevator trim acts on both servos.
Note
In case of "2ELE Sv 3+8", there is no selection possibility for the input
8 in the "Control setting" menu, for safety reasons.
Tail type
Motor at C1
Normal
None
Aile/flaps 1AIL
Model type
Brake Off In1+100%
SEL
Tail type
Motor at C1
normal
None
Aile/flaps 1AIL
Model type
Brake Off In1+100%
SEL
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Graupner MC-28 4D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info