Bedienungsanleitung Graupner MICRO MAGIC 2014 (Seite 2 von 15) (Englisch)

637252

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY

#0057088

Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce

modifications. Sous réserve de modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression! 11/2006

The following points are important and must be observed at all times:

• This model is not suitable for young persons under fourteen years of age.

• The keel ballast bulb is made of lead! This material is toxic, and must not be allowed to enter the body.

Sanding dust and slivers of the metal are particularly dangerous, as they can easily be ingested. After

working on the lead weight, clean the work place immediately, and wash your hands thoroughly. If possible

wear gloves when handling this material.

• If you need to dispose of the lead weight at any time, be sure to take it to your local toxic waste collection

point. It must never be discarded in the household refuse. If you are not sure where you can take scrap

lead, ask your local authority for information.

• The projecting parts of the model may be sharp, and the aerials and masts may cause eye injuries.

• If the model is to be built by a youngster, a parent or guardian must monitor the assembly process, as tools

and adhesives can be hazardous.

• Please operate the model carefully when there are persons or animals in the water; always keep a safe

distance between the boat and man or beast.

• Never run your boat in a protected site, an animal or plant sanctuary or a site of special scientific interest

(SSSI). Check with your local authority that the stretch of water you wish to use is suitable for model boats.

• Do not sail the vessel in salt water.

• Never run your boat in adverse conditions, e.g. rain, storm, strong wind (above Beaufort 4), choppy water

or strong currents.

• As the model is propelled solely by the wind, it should only be sailed in wind strengths of 1 to 3 on the

Beaufort scale (leaves moving in the wind). If the wind is stronger, the boat could heel severely and be

impossible to control. Gusty conditions should also be avoided.

• The model requires a breeze in order to move, i.e. in flat calm conditions the boat will just remain stationary

on the water. Please bear this in mind before sailing the model.

• Before you operate the boat, please check that the radio control system is working reliably.

• It is important to check the range of the radio control system: switch the radio control system on, hold the

transmitter in your hands, and walk about 50 m away from the boat. All the radio-controlled functions

should continue to work normally at this range.

• Ensure that the channel you intend to use is not already occupied by another modeller. Never run the boat

if you are not certain that your channel is free.

• Note that other radio equipment and transmitting stations may cause serious interference to the model’s

receiving system. If possible, ensure that no such apparatus is in use in the vicinity while you are operating

the boat.

• Switch the model’s radio system off before carrying out any work on the boat.

• Dry cells and rechargeable batteries must never be short-circuited, nor allowed to come into direct contact

with water.

• Remove all batteries from the model and the transmitter when you know you will not be using them in the

near future.

• Do not subject the model to high levels of humidity, heat, cold or dirt.

• Secure the model and the transmitter when transporting them, as they may be seriously damaged if they

are free to slide about.

• Never operate the model on moving water (e.g. a river), as it could easily be washed away downstream if

the wind conditions change.

• If you have to salvage the model, take care not to risk your own life or that of others.

• Check regularly that the boat is completely watertight, as it may sink if too much water enters the hull.

Check the model for damage before every run, and ensure that water cannot penetrate the hull.

• Allow the boat to dry out thoroughly after use.

Care and maintenance

• Clean the model carefully after every run, and remove any water which gets inside the hull. If water gets

into any of the RC components, dry them out and send them to your nearest GRAUPNER Service Centre

for checking.

• Clean the model and the transmitter using suitable cleaning agents only. We recommend wiping with a lint-

free cloth. Never use chemical cleaners, solvents, petrol, white spirit or similar.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MICRO MAGIC 2014 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info