Bedienungsanleitung Graupner MX-16 HoTT (Seite 23 von 200) (Englisch)

467107

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Description of transmitter

#01

3:33h

stop

flt

0:00

5.5V

5.2V

HoTT

Note:

If there is an SD card installed, withdraw it BEFORE you

remove the transmitter’s back panel, otherwise there is a

risk that you will damage the card.

Prepare the memory card as described, remove it from

the transmitter, and insert it in a suitable card reader.

Make sure the reader is connected to your PC or lap-

top, and copy the ﬁles previously downloaded from the

Download page for your transmitter into the appropriate

folder. Finally remove the memory card from the card

reader, and replace it in the transmitter.

Data recording / storage

The process of saving data on the SD card is coupled to

the ﬂight timer: if the timer is started, then data saving

commences - provided that a suitable memory card

is in the card slot, and a telemetry connection to the

receiver exists - and ceases again when the ﬂight timer

is stopped. The ﬂight timer is started and stopped as

described in the “Timers” section on page 77 for ﬁxed-

wing models, and pages 86 for model helicopters.

When data is being recorded, the card symbol

ﬂashes constantly and slowly.

When data is being written to the memory card, the

memory card symbol swells from left to right to indicate

the process.

When a data storage process is concluded, you will ﬁnd

an (empty) “Models” folder and a “Log-Data” folder on

the memory card. The latter contains the log ﬁles, stored

in sub-folders named “Model name”, using the format

0001 Year-Month-Day.bin, 0002 Year-Month-Day.bin etc.

However, if a model memory has not yet been named,

then you will ﬁnd the associated log ﬁles in a sub-folder

named “NoName” when you remove the memory card

from the transmitter and insert it in the card slot of a PC

or laptop. The data can subsequently be analysed on a

compatible PC using the PC program available on the

Download page for the transmitter at www.graupner.de.

Firmware updates / Changing the screen language

It is possible to replace and / or update the transmit-

ter’s ﬁrmware - and the transmitter’s screen language,

if necessary - under menu control, as described in

detail on page 27 under the title “Firmware update” in

the “Hidden Mode” chapter. In addition to a German

version of the ﬁrmware, the SD card supplied in the set

as standard also contains ﬁrmware versions in English,

French, Italian and Spanish; this information was correct

at the time these instructions went to press.

Corresponding updates and information can be found

in the Download area of www.graupner.de under the

product concerned.

Importing voice ﬁles

As mentioned in the “Headphone socket” section on

page 21, the signals associated with the Telemetry

menu and voice messages can be generated via this

socket, in addition to the transmitter’s audible signals.

These voice messages are collected in a voice package

and stored in the transmitter’s internal memory, but they

can be replaced by a voice package in another language

at any time. For more information on this please refer to

the “HIDDEN MODE” section starting on page 26.

Importing and exporting model memories

Any model memories can be copied onto a memory

card in the transmitter, or copied from the card into the

transmitter, so that you can exchange data between

identical transmitters, and also back up your data. For

more information please see the “Model memories”

section starting on page 70.

Note:

Some of the special characters used in certain model

names cannot be accepted due to speciﬁc limitations

of the FAT or FAT32 ﬁle system used by memory cards.

During the copy process they are replaced by a tilde (~)

character.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info