Bedienungsanleitung Graupner MX-16 HoTT (Seite 159 von 200) (Englisch)

467107

159

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

159

Program description: Trainer system

–P

2 3

7 8

BIND: N/A

SW: –––

TRAINER/Pupil

Teacher transmitter

Up to eight of the Teacher transmitter’s (“Teacher”)

transmitter control functions can be transferred to the

Pupil transmitter (“Pupil”), either individually or in any

combination.

For this reason the bottom line of the screen, marked

“L”, indicates those function inputs which are perma-

nently associated with control functions 1 … 4 (dual-axis

stick functions on ﬁxed-wing models and helicopters), as

well as the freely assignable inputs 5 … 8 of the “Trans-

mitter control settings” menu.

Note:

In principle it makes no difference which individual

transmitter controls are assigned to the inputs which are

to be transferred to the pupil. However, they can only be

assigned in the “Transmitter control settings” menu

with the Trainer connection switched off.

Use the arrow buttons  of the left or right-hand

touch-key to select the transmitter controls 1 to 8 () to

be transferred to the pupil, and brieﬂy press the central

SET button of the right-hand touch-key in each case, so

that they switch from “T (Teacher)” (

) to “P (Pupil)” ( ):

–P

1 2 3

7 8

BIND:SW: –––

N/A

TRAINER/Pupil

You still have to assign a Trainer transfer switch on the

right of the screen so that you can actually transfer

control to the Pupil. This is accomplished by using the

arrow buttons of the left or right-hand touch-key to place

the marker frame next to “SW” at bottom left, and assign

a switch as described on page 49.

We recommend that you use one of the two momentary

switches SW 1 or SW 9 as the transfer switch, to ensure

that the Teacher transmitter can regain control instantly

at any time:

1 7 8

BIND:SW:

N/A

TRAINER/Teach

–P

student

signal

Since it is very unlikely that a prepared (i. e. ready for

use) Pupil transmitter will already be connected to a

Teacher transmitter at this early stage of programming a

Trainer system, the transmitter will generate appropriate

visual and audible warnings when the switch is operated

as part of the switch assignment procedure. You should

therefore re-open the switch once you have assigned it:



1 2 3

7 8

BIND:SW:

N/A

TRAINER/Teach

Note:

The switch assignment procedure described above

determines which transmitter provides the Teacher

function, and which provides the Pupil function. For this

reason a switch must NEVER be assigned to the Pupil

transmitter in this menu. To underline this, the menu

headline switches from “TRAINER / pupil” to “TRAI-

NER / teacher” as soon as a switch is assigned.

Now use the arrow buttons of the left or right-hand

touch-key to move the marker to “BIND: N/A” on the

right:



1 2 3

7 8

BIND:SW:

N/A

TRAINER/Teach

Binding the Pupil transmitter to the Teacher trans-

mitter

Note:

During the binding procedure the distance between the

two transmitters should not be too great. You may need

to change the relative position of the two transmitters

and initiate the binding process a second time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info