Bedienungsanleitung Graupner MX12 (Seite 75 von 144) (Deutsch, Englisch, Französisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

corresponding control surfaces.

5. After determining which channel(s) need to have the

throw directions reversed, use the Select key to call

up the appropriate channel.

6. Press either the (+) or (-) keys to change the travel

direction of the servo. Pressing the Clear key returns

the travel direction to Normal.

7. You can observe the change in the travel direction

by moving the appropriate control at this time.

8. Access the D/R & EXP function by pressing the

Down key.

9. Access the SUB TRIM function by pressing the Up

key.

10. Exit the SERVO REVERSING function by pressing

the Down and Select keys simultaneously.

Sub Trim

The Sub Trim Adjustment function allows you to electro-

nically fine-tune the centering of your servos. Individual-

ly adjustable for all six channels with a range of +/-125%

(+/- 30 degrees servo travel).

The sub trim functions provide precise servo arm neutral

positioning if rotating the servo arm will not allow the

desired servo arm position.

Function mode HELICOPTER

Sub Trim; Travel Adjust

Function mode HELICOPTER 27

Channel beeing programmed

TH 1: Throttle

AI 2: Aileron

EL 3: Elevator

RU 4: Rudder

GE 5: Gear

PI 6: Pitch

Sub Trim Value

(0~+/-125)

Go to travel Adj

Go to Reversing

SW menu

Select channel

Change value

Reset selection to

default

Accessing the Sub Trim Function

1. Place the transmitter power switch in the ON positi-

on.

2. To Access the Function mode, press the Down and

Select keys simultaneously.

3. Press either the Up or Down key until SUB TRIM

appears in the upper middle portion of the LCD.

4. Press the Select key until the desired channel

appears.

5. Press the (+) or (-) key to establish the desired

amount and direction of Sub-Trim.

Caution: Do not use excessive sub-trim adjustments

since it is possible to overrun your servo`s

maximum Sub Trim. Remember that it is a

trim convenience function. It is not intended

to take the place of the proper mechanical

trim adjustments that are necessary on any

RC model.

6. Access the REVERSING SW function by pressing

the Down key.

7. Access the TRAVEL ADJ function by pressing the

Up key.

8. Exit the SUB TRIM function by pressing the Down

and Select keys simultaneously.

Travel Adjust

The purpose of Travel Adjust is to offer you precise ser-

vo control deflection in either direction of servo opera-

tion. The mx-12 offers travel adjust for all six channels.

The Travel Adjust range is from 0-150% (0 degrees to

60 degrees) from neutral, or center, and it can be ad-

justed for each direction individually. The factory default

(Data Reset) value is 100% for each direction of servo

travel.

Travel value

(0~150%)

Channel beeing programmed

TH 1: Throttle

AI 2: Aileron

EL 3: Elevator

RU 4: Rudder

GE 5: Gear

PI 6: Pitch

Change value

Reset value to normal

Go to Swash Mixing

or Throttle cut menu

Go to Sub Trim

Select channel to

adjust

Accessing the Travel Adjust Function

1. Place the transmitter power switch in the ON positi-

2. Access the Function mode by pressing the Down

and Select keys simultaneously.

3. Press either the Up or Down key until TRAVEL

ADJ appears in the upper portion of the LCD.

4. Press the Select key until the desired channel is

highlighted.

5. Move the appropriate control stick (lever, switch,

etc.) to right or left of the center to the direction of

travel you want to adjust value will reflect the current

position to be adjusted

6. After the control stick or switch is placed in the dir-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info