542407
83
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
35 / 48
S1042_sh_V1
"2AILE"
For models with 2 aileron servos.
By aileron actuaon the servos connected to the outputs 2 and 5
work in parallel. The aileron trim acts on both servos.
Note
A conversion of "CH5" has in this case no eect.
"DELTA"
For delta and flying-wing model with one servo each wing.
The aileron and elevator control are carried out through the servos
connected to the channels 2 and 3. The mixer for ailerons and ele-
vator are actuated by the transmier. The aileron and elevator trim
acts on both servos.
"V-TAIL"
For models with V-tail and 1 or 2 aileron servo.
The elevator and rudder are controlled by two separately-arculated
rudders arranged in a V-shape connected to channel 3 and 4. The
mixer for rudder and elevator is actuated by the transmier. The
rudder and elevator trim acts on both servos.
The related acve seng will be indicated aer the transmier
switch-on for about ve seconds through the LED field on the trans-
mier.
Programming step-by-step
1. Switch on the transmier without programming connector.
These opons can be select
ed in each of the three operang
modes (NORMAL, TEACHER, PUPIL).
2. Press the arrow buon to the right of the LED field for at least 2
seconds.
Aer releasing, a short beep will be heard and the CH1 LED in the
"REVERSE" LED line flashes.
3. Press the arrow buon to the right of the LED field unl the LED
of the desired opon flashes.
Between the seven possible seng opons CH1 ... CH5, 2AILE
and DELTA is changed in the rotary process.
(The LEDs of opons CH1 ... CH5 flash red, the LEDs of opons
2AILE and DELTA are green.)
4. To change the status of the desired opon push the MODE but-
ton.
The blinking LED lights solid on.
5. Use the arrow buon to the right of the LED field to move to the
next opon and change the next opon.
6. You can always interrupt exit this menu by pushing for at least 2
seconds the arrow buon.
83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Graupner mz-10 HOTT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Graupner mz-10 HOTT

Graupner mz-10 HOTT Bedienungsanleitung - Deutsch - 72 seiten

Graupner mz-10 HOTT Bedienungsanleitung - Englisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info