Bedienungsanleitung Graupner POLARON EX-1400 - GR-S2018 (Seite 9 von 29) (Englisch)

637253

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

INNOVATION & TECHNOLOGIE

16 17

page 43.

• You can correct date and time in the third screen of the menu “Settings“, page 44.

• The device name is displayed by default in the basic display below the date and time, you can

replace it with your name or any other name with a maximum length of 12 characters in the

fourth screen of the menu “Settings“, page 44.

Basic operations

The Graupner Polaron charger series are equipped with a touch-sensitive

screen. You just have to touch the icon you want to tap or the desired option

with a nger or with the pen placed in the right side to go to the desired menu

item or to activate the item to set.

After switching on the device and the passage of the Start Ads, it will appear

on the display of Graupner Polaron EX-1400 the main screen of the device as

shown on the left. Among other things on the top of the screen it displays the

date and time*.

From this basic display, you can switch out with a nger or the supplied pen

placed in the right side arbitrarily in each of the available sub-menus by press-

ing the corresponding icon. The selected icon becomes briey gray after tap-

ping and you hear a tone. Then the selected page is displayed.

With a press of the central blue pushbutton below the display or pressing the CH1 or CH2 labe-

led buttons at the bottom of the screen, you can switch between the charging terminals CH1 and

CH2. The chosen charging port is highlighted in red. A data exchange between the two charging

terminals is not possible. Only through the simultaneous connection of two identical lithium pack

to charge output CH1 and CH2, it is possible to control in parallel charge port 1 and port 2, by the

choice of charging modes menu of CH1 [CV-LINK], see page 21.

If the battery charger is rstly not responding as expected, check foremost the settings.

But if you have made your settings in the options of that charge channel (CH1 and CH2)

in particular, check to which one your battery is connected.

* The abbreviations “AM“ (ante meridian = before noon) and “PM“ (post meridiem = after noon) derived from Latin

and are used among others in the English language.

Menu name Short description

PROFILE battery name, type, capacity, number of cells, memory nr., Memory Copy

CHARGE set and activating the charge function

DISCHARGE set and activate the discharge function

CYCLE set the ...

... Cycle mode: charge/discharge, discharge/charge,

1x discharge/charge/discharge

... Number of cycles: 1 ... max. 10

... Pause between cycles: 1 ... 30 minutes

(The charge or discharge parameters have to be setted in the menu

“CHARGE“ or “DISCHARGE“)

BALANCE Displays cell voltages and related data, balancer data setting

DATA Selecting and view of device and battery data

TOOLS Servo tester, motor setup, tire warmers, setup function for telemetry capa-

ble Esc

SETTINGS Entering data for power supply, alarm thresholds, date / time, name, etc.

STORAGE With this option, all usable lithium batteries can be placed on the optimum

storage condition.

Control buttons

ESC button

Press this button to conrm the current setting and disables the active set-

ting page. In addition, press this button to return to the previous page and

changed data is stored.

DEC button

Press this button to change if necessary one page down or reduce setting

values in the selected elds.

INC button

Press this button to change if necessary one page up or increase setting

values in the selected elds.

ENTER but-

ton

Press this button to change if necessary to the nearest side of the display;

start a process or store the entered data.

CPY button Press this button to copy values or settings.

Push button

on the front

1. With a press of this button changes between CH1 and CH2.

2. Press and hold during power up:

Recall the <Factory Default>, see page 45

Menu PROFILE

In the “PROFILE“ menu you store the data of your batteries and complement them with the re-

spective charge/discharge parameters in the “CHARGE“ and “DISCHARGE“ menus. The data on

the currently active charge channel (CH1 / CH2) are displayed by default for the last battery mem-

ory selected after opening this menu.

To change this selection, you have to tap on the upper “memory location“ eld with your nger or

with the supplied pen placed in the side of the device. Choose the desired memory location 0 ... 19

in the blue area via the INC / DEC buttons at the bottom of the display. Tapping again the eld

deactivates the choice.

“Upper” Settings

Field Description

01 “BATTERY

NAME“

Number and name of the selected memory location

Type Battery type (NiCd, NiMH, LiIo, LiPo, LiFe, Pb)

Volt (Voltage) Cell number from type and cell voltage resulting from bat-

tery voltage

Capac. (Capacity) Battery capacity

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner POLARON EX-1400 - GR-S2018 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info