Bedienungsanleitung Graupner ULTRA TRIO PLUS 16 - 6469 (Seite 36 von 107) (Deutsch, Englisch, Französisch, Italienisch)

637232

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

11. Ni-Cd programs (Output 1)

A set of convenient charge programs for recharging Nickel-Cadmium batteries, as commonly used for

modelling purposes. When the charge / discharge program is ﬁ nished, the screen displays the name

of the charge program alternating with the message „END“, together with the charge time, the last

(dis-) charge current, the charged-in (discharged) capacity and the battery voltage, and continues to

do so until you disconnect the battery. This information can often give you a useful indication about the

Ni-Cd pack’s charge characteristics and capacity, or warn you if the charger has incorrectly assessed

the pack as being „full“.

NiCd

AUTOMATIC-

program

NiCd

MANUAL-

program

NiCd

discharge

program

NiCd

cycle

program

NiCd



delta-peak

trigger voltage

MODE MODE MODE MODE MODE

MODE

NiCd

discharge balan-

cing program

Ni-Cd manual program

Ni-Cd discharge program

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

N i C d - M a n

C : 2 . 5 A

DEC

INC

Select this program when you simply wish to recharge a

battery using the set charge current.

You can adjust the charge current using the INC / DEC

buttons, but only before you connect the pack for charging.

The range available is 0.1 A to 10 A.

The charge process is terminated automatically in accor-

dance with the values already set for „Ni-Cd Delta Peak

cut-off voltage“.

The typical purpose of this program is to determine the

residual capacity of a transmitter, receiver or drive battery,

or to discharge the pack to a deﬁ ned level.

In this program the charger discharges the pack using the

set discharge current (0.1 ... 5.0 A, left of screen) until its

voltage falls to the set ﬁ nal discharge voltage (0.1 ... 16.8 V,

right of screen).The set ﬁ nal discharge voltage should be a

value of around 0.9 ... 1,1 V per cell, in order to avoid the

pack becoming deep-discharged. Deep-discharging a pack

runs the risk of reversing individual cells, i.e. they exhibit

reversed polarity.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

N C - D:

1 . 0 A 4 . 8 V

DEC

INC

DEC

ENTER

INC

Ni-Cd automatic program

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

N i C d - A u t o < 2 . 5 A

DECINC

In this program the charger detects the type of Ni-Cd battery

connected to it, and adjusts the charge current accordingly

to avoid overcharging the pack.

The maximum charge current can be set before you con-

nect the battery to be charged. This is done using the INC

/ DEC buttons; the range available is 0.1 A to 10 A, or no

restriction. The charge process is terminated auto-matically

in accordance with the values already set for „Ni-Cd Delta

Peak cut-off voltage“.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

N i C d d i s c h a r g e

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

N i C d m a n u a l

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

N i C d a u t o m a t i c

2 sec.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner ULTRA TRIO PLUS 16 - 6469 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info