Bedienungsanleitung Graupner Ultramat 18 - 6470 (Seite 36 von 92) (Deutsch, Englisch, Französisch)

637245

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

The fundamental rule is that Lithium-based batteries may ONLY be charged using

special chargers, and the charge program must be set up correctly in terms of final

charge voltage and capacity for the battery type in use. The charge process is

fundamentally different to that required for Ni-Cd or Ni-MH batteries, and is termed

a constant current / constant voltage method. The charge current required varies

according to the battery capacity, and is set automatically by the charger. Lithium

batteries are usually charged at the 1C rate (1C charge rate = half capacity as charge current. Example:

battery capacity 1500 mAh: 1C charge current = 1500 mA = 1.5 A).

Because some types can be charged with upt to 2C or 4C charging current, the charging current and

the capacity of the battery must be set seperately. When the battery on charge reaches the specific final

voltage which is appropriate to the battery type, the charger automatically reduces the charge current

in order to prevent the battery exceeding the final permissible voltage. If the battery manufacturer states

a charge current lower than the 1C rate, then the capacity (charge current) must be reduced accordingly.

We recommend the use of the balancer connector, which ensures that your Lithium batteries are

charged optimally, and therefore increases safety and their useful life.

Problems caused by mistreating batteries:

It is very dangerous to overcharge Lithium-Ion batteries, as they tend to react by gassing, overheating

and even exploding. If the final charge voltage of 3.6 V / cell (LiFePO

), 4.1 V / cell (Lithium-Ion) or 4.2

V / cell (Lithium-Polymer and Lithium-Manganese) is exceeded by more than 1%, the lithium ions in the

cell start to change into metallic lithium. This material reacts very violently with the water in the electrolyte,

and this can result in the cell exploding. On the other hand it is also important to avoid terminating the

charge process before the final charge voltage is reached, since this reduces the effective capacity of

the Lithium-Ion cell markedly. Stopping the charge at just 0.1 V under the threshold means a capacity

loss of around 7%. Lithium batteries must not be deep-discharged, as this leads to a rapid loss of

capacity. This effect is irreversible; it is absolutely vital to avoid discharging the batteries to below 2.5 V

/ cell.

Caution: the cell type, cell capacity and cell count set on the charger must always be correct for

the battery to be charged; if you make a mistake, the battery could explode and burn! Never

connect a Lithium-based battery to the charger if it features an integral charge circuit! Always

place your Lithium batteries on a non-flammable surface for charging.

charge time

current

voltage

13. Lithium programs

These programs are only suitable for charging and discharging LiFePO

batteries with a voltage

of 3.3 V / Cell, Lithium-Ion batteries with a voltage of 3.6 V / cell, and Lithium-Polymer and

Lithium-Manganese batteries with a voltage of 3.7 V / cell. The outstanding feature of Lithium

batteries is their much higher capacity compared to other battery types. However, this important

advantage is offset by the need to adopt different handling strategies: they must be charged and

discharged using specific methods, otherwise they will be damaged, and can be dangerous. The

directions in these instructions must be observed at all times when handling these batteries.

Specific information and safety notes will also be found in the battery manufacturer’s technical

information.

Lithium

MANUAL-

program

Lithium

discharge

program

Lithium

type

select

MODE MODE

MODE

Lithium

storage

program

MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner Ultramat 18 - 6470 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info