Bedienungsanleitung Graupner XG-6i (Seite 20 von 30) (Deutsch, Englisch, Französisch)

637243

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

09 94001 GM-Racing XG-6i Race Spec Instructions

English

9. SERVO SPEED (SPD)

This function include tow items: STEERING SPEED and THROTTLE SPEED.

1. Press “ENTER” to see FUNCTION MENU

2. Use the +/- Keys to select the SPEED function and press ENTER.

3. Press ENTER to select a setting.

4. Use the +/- Key to change the value.

5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to

return to the Main Screen.

2.THROTTLE SPEED

- Sudden throttle trigger operation on a slippery road only causes the wheels to spin and

the vehicle cannot accelerate smoothly. Setting the throttle speed function reduces wasteful

battery consumption while at the same time permitting smooth, enjoyable operation.

- Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if the

throttle trigger is operated more than necessary. This delay function is not performed when

the throttle trigger is returned and at brake operation.

Adjustment:

1. Select the TH button by +/- Keys.

2. Press Enter to select SPD. FL item.

3. Use +/- Keys change the value.

4. Press exit twice return to the function menu.

TERMS:

SPD.FL- SPEED FORWARD DELAY. Range:0~100%, default:0

SPD.Bk- SPEED BACKWARD DELAY. Range:0~100%, default:0

Quick steering operation will cause momentary under steering, loss of speed, or spinning.

This function is effective in such cases. This function limits the maximum speed of the stee-

ring servo. (Delay function)

- The steering speed when the steering wheel is operated (TURN direction) and

returned (RETN direction) can be independently set.

- If the steering wheel is turned slower than the set speed, the steering servo is not

affected.

94001 GM-Racing XG-6i Race Spec Instructions 10

English

10. AUTOMATIC START (ATS)

When the throttle trigger is set to full throttle simultaneously with starting when the track is

slippery, the car wheels will spin and the car will not accelerate smoothly. When the Start

function is activated, merely operating the throttle trigger slowly causes the throttle servo to

automatically switch from the set throttle position to a preset point so that the tires do no loose

their grip and the car accelerates smoothly.

- When the throttle trigger is moved to the preset trigger position (TRI), the throttle servo

moves to the preset position (POS).

- When the throttle trigger is operated slowly so that the wheels will not spin, the car auto-

matically accelerates to the set speed.

- This function is effective only for the ﬁ rst throttle trigger operation at starting. This func-

tion has to be activated before every start.

- When the throttle trigger is returned slightly, the Start function is automatically deactiva-

ted and the set returns to normal throttle trigger operation.

1. Press “ENTER” to see FUNCTION MENU

2. Use the +/- Keys to select the ATS function and press ENTER.

3. Press ENTER to select TRI (Throttle Trigger) item. Use +/- to change the value. Range:

- 100%~+100%..

4. Press ENTER to select POS (Preset Position) item. Use +/- to change the value. Range:

0%~100%.

5. Press ENTER to select DLY (ATS delay time) item. Use +/- to change the value. Range:

0~100.

6. Press ENTER to select MOD (ATS Ready setting) item. Use +/- to change INH or RDY.

7. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to

the Main Screen.

11. MODULATION (MODULATE)

With this function the transmitter and receiver are bound together. This function was already

described on page 2.

12. BRAKE MIX (BK-MIX)

When using a secondary brake system set the BRAKE MIX value to a percentage of the

Throttle Brake. This mixing uses the 2nd channel to control the rear brakes and the

3rd channel to control the front brakes. This function can be used in conjunction with the TH

TRIM and TH EPA to ﬁ ne tune the power and balance of the overall braking system.

1. Press “ENTER” to see FUNCTION MENU

2. Use the +/- Keys to select the BR_MIX function and press ENTER.

3. Press ENTER to select a item.

4. Use the +/- Key to change the value.

5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to

return to the Main Screen.

TERMS:

RATE -- the rate of brake between 3rd channel and 2nd channel. Default value: 0 -120%.

EN -- the start or close switch of this function. Select “ON” to start the function, and “OFF”

to close the function.

94001-eng.indd Druckbogen 10 von 10 - Seiten (10, 11)94001-eng.indd Druckbogen 10 von 10 - Seiten (10, 11) 19.01.2009 08:02:4919.01.2009 08:02:49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner XG-6i Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info